Re: Advanced Client install nightmare

Hi again,

I have deleted and re-created the client install account and the client
connection account but am still seeing the same errors!

I have reset the counters for the CLIENT_CONFIG_MANAGER log, is this the
same as clearing the status messages? Or is there a different way.

I am still getting the same errors in the CCM.log


--
IT Engineer



"Diwan" wrote:

Hi

First of all clear your status messages from SMS server as Santos told.

other thing look bad is.
look like you have missed the remote client installtion account.
recreate it and double check, it happens.

Warning: no remote client installation or SMS service account found
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006 GMT Daylight

Time><thread=3768 (0xEB8)>


thanks,

Diwan

Jonathan wrote:
Hi,

there are lots of errors in the site status under SMS_CLIENT_CONFIG_MANAGER
stating that SMS either cannot find the clients

SMS Client Configuration Manager cannot find machine "SCAT-000956" on the
network. The operating system reported error 53: The network path was not
found.

Or a similar error which states that access is denied.

Here is more info from the ccm log :

Received request: "SCAT-003321.SCAT" for machine name: "SCAT-003321" on
queue: "Retry". $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:43.176 2006
GMT Daylight Time><thread=2992 (0xBB0)>
Error event time has expired for Request "SCAT-003321.SCAT" for machine
"SCAT-003321". $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:43.176 2006
GMT Daylight Time><thread=2992 (0xBB0)>
Stored request "SCAT-003321.SCAT", machine name "SCAT-003321", in queue
"Processing". $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:43.176 2006 GMT
Daylight Time><thread=2992 (0xBB0)>
WARNING: High volume of CCRs. Slowing down the queue processing thread~
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:43.176 2006 GMT Daylight
Time><thread=2992 (0xBB0)>
Received request: "ZBUFWQR1" for machine name: "SCAT-002291" on queue:
"Incoming". $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:43.208 2006 GMT
Daylight Time><thread=2988 (0xBAC)>
Stored request "ZBUFWQR1", machine name "SCAT-002291", in queue
"Processing". $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:43.208 2006 GMT
Daylight Time><thread=2988 (0xBAC)>
WARNING: High volume of CCRs. Slowing down the queue processing thread~
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:43.208 2006 GMT Daylight
Time><thread=2988 (0xBAC)>
---> ERROR: Unable to connect to remote registry for machine name
"10.3.1.128", error 53. $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11
07:49:52.895 2006 GMT Daylight Time><thread=3768 (0xEB8)>
---> ERROR: Unable to access target machine for request: "Z61FJZP2", machine
name: "SCAT-001117", error code: 53 $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11
07:49:52.895 2006 GMT Daylight Time><thread=3768 (0xEB8)>
Retry request id for "Z61FJZP2" set to "SCAT-001117.SCAT"
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006 GMT Daylight
Time><thread=3768 (0xEB8)>
Stored request "SCAT-001117.SCAT", machine name "SCAT-001117", in queue
"Retry". $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006 GMT
Daylight Time><thread=3768 (0xEB8)>
<======End request: "SCAT-001117.SCAT", machine name: "SCAT-001117".
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006 GMT Daylight
Time><thread=3768 (0xEB8)>
======>Begin Processing request: "Z6FKB7JW", machine name: "SCAT-003683"
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006 GMT Daylight
Time><thread=3768 (0xEB8)>
---> Trying each entry in the SMS Client Remote Installation account list~
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006 GMT Daylight
Time><thread=3768 (0xEB8)>
---> Warning: no remote client installation or SMS service account found
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006 GMT Daylight
Time><thread=3768 (0xEB8)>
Submitted request successfully $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11
07:49:53.176 2006 GMT Daylight Time><thread=2992 (0xBB0)>
Getting a new request from queue "Retry" after 100 millisecond delay.
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:53.176 2006 GMT Daylight
Time><thread=2992 (0xBB0)>
Found CCR "SCAT-003322.SCAT.CCR" in queue "Retry".
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:53.176 2006 GMT Daylight
Time><thread=2992 (0xBB0)>
WARNING: A request for machine 'SCAT-002291' is already in the processing
list. Merging CCR Data. $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11
07:49:53.208 2006 GMT Daylight Time><thread=2988 (0xBAC)>
Failed to submit request for processing (52)
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:53.208 2006 GMT Daylight
Time><thread=2988 (0xBAC)>
Deleted request "ZBUFWQR1", machine name "SCAT-002291"
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:53.208 2006 GMT Daylight
Time><thread=2988 (0xBAC)>
Getting a new request from queue "Incoming" after 100 millisecond delay.
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:53.208 2006 GMT Daylight
Time><thread=2988 (0xBAC)>
Found CCR "zby1qegf.CCR" in queue "Incoming".
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:53.208 2006 GMT Daylight
Time><thread=2988 (0xBAC)>

I am really tearing my hair out with this one, we did a complete setup in a
test environment and had no problems what so ever! Now we have gone live it
is a nightmare!

Cheers

--
IT Engineer



"Santos Martinez" wrote:

Question when you go to the sms site status theres no errors on it ...?

--
Santos Martinez,MCSE, MCDBA, MCTS
IT Community Staff of Puerto Rico
http://www.itcspr.org



"Diwan" wrote:

Hi,

sometimes admin$ is disabled from Registry.

and NAL stands for Network Access Acount which is not a valid reason in
this case.

can you please paste bit more detailed CCM log file.

thanks,

Diwan

Jonathan wrote:
Hi Diwan,

Thanks for the reply, can you clarify for me what an NAL is?

Also, i can see the ADMIN$ share on all of my client machines when i look in
our DAMEWARE application, so i am guessing it is enabled, its certainly
nothing that i have ever configured before...

Cheers
--
IT Engineer



"Diwan" wrote:

Hi,

check you have created NAL on SMS server.

and Admin$ share is enabled on clients.

thanks,

Diwan
Jonathan wrote:
Hi All,

I am trying to install the advanced client across my network. I have
collected all of the client machines and am wanting to use the Push
Installation method.

I have configured the push installation to use an Enterprise Admin account
called SMS2003, which is a member of the Local Admin group on each machine
but they always fail with either an Access denied error or a network
unreachable error. I can successfully install the client locally when logged
on as SMS2003 using the .MSI file.

I get the following in CCM.Log :

---> ERROR: Connected to SCAT-002319 registry, but couldn't connect to the
\\SCAT-002319\admin$ share using account ''
$$<SMS_CLIENT_CONFIG_MANAGER><Thu Aug 10

Any idea's as to what is going on? All of the machines are definately turned
on, i can Ping them all etc.
--
IT Engineer






.

Relevant Pages

  • Re: Advanced Client install nightmare
    ... I can successfully install manually using the SMS account. ... MS Client Configuration Manager cannot install the Advanced Client to ...
    (microsoft.public.sms.admin)
  • Re: Client Installation Issues: SMS 2.0 SP5
    ... As you said if you have local account which has admin rights on the box, ... > Domain admin installs the client, ... > components install. ...
    (microsoft.public.sms.setup)
  • Re: Remove administrator account from domain guest group
    ... it will work for your client as well. ... the guests account and have full control without errors. ... Misuse of Domain Admin accounts certainly can wreek plenty of ... the domain guest users group. ...
    (microsoft.public.windows.server.sbs)
  • Re: Advanced Client install nightmare
    ... I can successfully install manually using the SMS account. ... MS Client Configuration Manager cannot install the Advanced Client to ...
    (microsoft.public.sms.admin)
  • Re: pushing software to non domain servers
    ... access to the machine to push the client. ... network access account defined. ... >> For systems in the workgroup you will need to install the agent manually. ...
    (microsoft.public.sms.misc)