Re: Network Discovery problems

From: Nguru (nguru_nospam_at_houston.rr.com)
Date: 06/24/04 

Date: Wed, 23 Jun 2004 19:15:54 -0500

Can this DHCP tab be enabled in Advanced Security mode?
Network Discovery has not worked the same ever since we deployed KB835732 to
our clients and server.

"Peter" <peter@nospam.com> wrote in message
news:OlGPdK9VEHA.4064@TK2MSFTNGP11.phx.gbl...
> I´m using SMS 2003 in advanced security on a w2k3 server.
> Are your suggestion applicable in that scenario? There is no DHCP tab in
the
> configuration like in SMS 2.0...
>
>
>
>
> "Travis Sweat (MSFT)" <travsw@microsoft.com> wrote in message
> news:Oi8yy75VEHA.3944@tk2msftngp13.phx.gbl...
> > Peter.
> > Have you set up DHCP for discovery? Remember the service account must be
> in
> > the DHCP users group in W2k and above.
> >
> >
> >
> >
> >
> > "Peter" <Peter.nospam@news.com> wrote in message
> > news:OmtVK%233VEHA.3696@TK2MSFTNGP10.phx.gbl...
> > > Doing a Network discovery usin SMS 2003, i have enabled the network
> > > discovery, added the 10 subnet i would like to scan (these subnets is
> NOT
> > > configured in site boundaries) , i have set a schedule and the
discovery
> > > have started.
> > >
> > > I have set the scan to be run in two hours every time.
> > >
> > > I have not changed anything in the domain, SNMP, SNMP devices etc,
these
> > > settings are default.
> > >
> > > BUT The discovery only finds computers on the subnet of the SMS site
> > > server,
> > > not on the other subnets.
> > >
> > > I have tried changing the router hops settings under SNMP and also
tried
> > > setting one of the subnets to also be a subnet in the site boundary
> > > without
> > > any difference.
> > >
> > > Looking at SMS Services (using SMS Admin) The Network Discovery
process
> is
> > > stopped. When i start this manually, it does a scan but stops almost
> > > directly and it only finds computers on the siteservers subnet
anyway.'
> > >
> > >
> > > I have the log for the Network discovery (netdisc.log). I am in
urgent
> > > need
> > > for ideas :-)
> > > Anyone that would like to take a look at it?
> > >
> > >
> > >
> > >
> >
> >
>
>

Relevant Pages

  • Re: Network Discovery problems
    ... Can this DHCP tab be enabled in Advanced Security mode? ... Network Discovery has not worked the same ever since we deployed KB835732 to ... our clients and server. ...
    (microsoft.public.sms.misc)
  • Re: XP clients do not appear in Collections
    ... You may have to enable logging on your server through the Tools - Service ... XP machines were not discovered until I created a collection ... .ddr file on clients. ... >> What discovery method did you enable? ...
    (microsoft.public.sms.admin)
  • RE: client install problem in remote sites
    ... having problem and make sure that thier IP adress was discovered. ... > Primary site is a member server in PA running on Windows 2003. ... > appropriately for their respective subnets, discovery has run, and the ... > clients in each site show in the console as assigned. ...
    (microsoft.public.sms.admin)
  • Re: SMS 2003 Network Discovery
    ... the subnet mask, we aren't creating the DDR. ... Network discovery works best when it is hitting the DHCP server. ...
    (microsoft.public.sms.admin)
  • Re: Incomplete Network Dircovery of SMS 2003
    ... We dont use MS DHCP servers and dont have snmp installed on the ... We do have snmp on our server and after about 72 hours it discovered these. ... > Q. Why can't I configure DHCP options for network discovery? ... > running advanced security. ...
    (microsoft.public.sms.setup)
Loading