Re: Printing on non-standard size paper

Hi Mike:
Thanx for your reply.
We are on an internal netowrk, and all folks see the same thing...
i.e. , all have the same problem tha Project does not see the plotter.
If a driver update is necessary, would this come from Microsoft
or HP (HP9500 plotter). Like I said earlier, Viso sees the plotter
just fine.

"Mike Glen" wrote:

OK, Dale, then the only other thing that I can think of is that Project is
not properly recognizing your plotter. Have you tried getting the latest
driver? If that doesn't work, then I'm at a loss to know what to suggest.
Does this happen with a new project? How's it on other PCs or Plotters?
Have you tried re-installing Project with its latest Service Releases?


Mike Glen
Project MVP




Dale wrote:
Hi Mike:
Thank you for your reply.
The FAQs did not help.
They basically talk about adjusting paper size, zooming, etc.
I have been throiugh all of this.
The Problem is that MS Project, Page Setuo, does not recognize that I
have a large paper source (e.g, HP9500 plotter) selected, evben
though FIle > Print shows it as being setup with the large page size,
etc.
The problem appears to be limitations in the Page Setup.
Any ideas ?
-Dale
=====================================================

"Mike Glen" wrote:

Hi Dale,

Welcome to the Microsoft Project newsgroup :-)

Please see FAQ Item: 44. Printing Problems

FAQs, companion products and other useful Project information can be
seen at this web address: http://project.mvps.org/faqs.htm

Hope this helps - please let us know how you get on:-)

Mike Glen
Project MVP

Dale wrote:
Hi
I have charts (various) in Project, that I want to printout on my HP
9500 plotter.
The plotter has a roll of paper that is 42" wide.
I setup the size under File > Print. ... no problem.
Now, I go to File > Page Setup...
Here's the problem...Page Setup does not allow me to use a
non-standard size source of paper. It has Custom sizes but does not
show the size I entered under File > Print ... just 8 1/2 x 11.
So, if I do a Print Preview, it panles (subdivides) the document to
be printed by the file size selected in Page Setup, not that
specified under File > Print.
File > Page Setup does not "see" that I have specified the plotter
with
a landscape paper size of 100 x 42 (100 or whatever length dimension
I give it).

I can choose other oversize paper sizes like ANSI E, F...etc. but
Project won't accept a specified non-standard paper size in Page
Setup.
Why not ?...and How to I work around this problem to be able to
specify
the plotter paper size ???




.

Relevant Pages

  • Re: Printing on non-standard size paper
    ... OK, Dale, then the only other thing that I can think of is that Project is ... not properly recognizing your plotter. ... The problem appears to be limitations in the Page Setup. ...
    (microsoft.public.project)
  • Re: Printing on non-standard size paper
    ... You're welcome, Dale. ... or HP (HP9500 plotter). ... The problem appears to be limitations in the Page Setup. ...
    (microsoft.public.project)
  • Re: Printing on non-standard size paper
    ... Dale wrote: ... all have the same problem tha Project does not see the plotter. ... If a driver update is necessary, ... The problem appears to be limitations in the Page Setup. ...
    (microsoft.public.project)
  • Re: Printing on non-standard size paper
    ... Dale wrote: ... all have the same problem tha Project does not see the plotter. ... The problem appears to be limitations in the Page Setup. ...
    (microsoft.public.project)
  • Re: Printing on non-standard size paper
    ... Please see FAQ Item: 44. ... The plotter has a roll of paper that is 42" wide. ... I setup the size under File> Print. ...
    (microsoft.public.project)
Loading