Re: Unable to obtain a server- assigned IP address Try again later or enter an IP address in Network Setting

Using xp, I can go to Control Panel - Network and Internet Connections -
Network Connections (or right click Network Neighbourhood on the desktop and
choose Properties) and choose the Local Area Connection icon, the ip address
shown in the panel on the left side is a subset of the router address (eg.
192.168.0.4). If yours is not a subset of your router, you do not have DHCP
enabled on your router!
Terry

"arena" <arena@xxxxxxxxxxx> wrote in message
news:1168200418.909333.199770@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Terry,

I am so sorry for making this more complicated to understand. I will
try to put the details here:

- I have a LINKSYS router (4 port connection) - I have my cable modem
connected to my LINKSYS. On this router, I have two Desktops connected
to it and the Belkin Access Point connected to it. I currently have 3
wireless laptops (2 - Windows, 1 - MAC) connected to the ACESS point.
All working normal.
- I am able to get into the web-based LINKSYS router Set Up, but it
states nothing about WEB to disable it.
- I also tried (succeeded only once) to get into my web-based Belkin
Set Up page, but it continues to be unsuccessful many, many times.
- The Internet is working with the Router and Access Point.
- It is my PDA that is not working. It was working properly until only
recently. No changes were made to the LINKSYS or the Belkin when it
stopped working.

At present, I have my HP IPAQ 2295 setting as:

General =
Network name: Is set at default
Connects to: Work (but also tried Internet, but it gives me tghe same,
exact results all the time)
Under Configure Network Authentication = Authentication is OPEN
Data Encryption: WEP

Network Key =
Network Key is on and accepted
Key Index: 1

702.1x =
The Use IEEE 802.1x network access control is NOT checked.

Under "Tap an adapter to modify" settings:
For ALL the below, it is set at Default as "Use server-assigned IP
Address"
- Remote-NDIA Host
- PPTP NDISWAN Miniport
- Virtual Ethernet Intermediate Miniport
- NE2000 Compatible Ethernet Driver
- L2TP NDISWAN Miniport
- Bluetooth PAN User Driver
- AsyncMac NDISWAN Miniport
- HP iPAQ Wi-Fi Adapter

My Status at present is:

Connected
Encryption Status: WEP
Access Point: Default numbers
IP Address: 0.0.1.41
more information:
DC+HCO: Enable
IP Address: 0.0.1.41
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1

As for your question here: "On other wireless devices (such as your
laptop, what is the assigned ip address? I will assume it is
192.168.1.xxx ; is that the right assumption?"

No, it gives me the actual IP Address to my Internet Server:
'7x.79.125.xxx" (open group here - I put the "x" there for privacy -
not from you, but others)

I hope this was helpful? Again, THANK YOU for being here for me!
.
tc wrote:
I have decided I don't understand your terminology. Usually you have a
DSL
or Cable modem connected to whatever supplies your internet. This is
extended to your router via a RJ45 cable. The router then hands out the
ip
addresses to the other devices wishing to talk to the internet (and each
other). Normally the wireless service is provided by the router. From
your
description, I assume you have a separate wireless access point
physically
connected to the router to provide wireless access.

You said that the pda showed a Gateway of 192.168.1.1 meaning it is
getting
its service via the wireless access point connected to the router.
Therefore
you would reach the router at 192.168.1.1 and the access point at
192.168.1.xxx (an address assigned by the router).

Is this correct so far?
On other wireless devices (such as your laptop, what is the assigned ip
address? I will assume it is 192.168.1.xxx ; is that the right
assumption?
Terry


"arena" <arena@xxxxxxxxxxx> wrote in message
news:1168193599.909413.177980@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Terry,

I can get into my router set-up with no problem... I just cannot get
into the Access Point Set Up at ALL???!! OMG this is driving me
insane! I am truly understand about computers and how they work more
than the average person... BUT this is truly a dead issue for me :(

What is the step for me to get into the Access Point without shutting
down the Internet??? I know I have to put 192.168.2.254 in the Address
Bar... I know to change the setting for the Internet Protocal (TCP/IP)
under Properties... still NADA.......nothing happens and my internet
connection is gone.

I am on my land-desktop trying to do all this.......

When the screen finally changes when trying to access "192.168.2.254",
"the page cannot be displayed".

ooohhhhh Headache time for me!!! LOL


tc wrote:
Sounds like you are using 128 bit WEP (64 is only 10 characters) Are
you
sure you are set up correctly for this on the pda and typing in the
correct
character string.
Terry

"arena" <arena@xxxxxxxxxxx> wrote in message
news:1168136321.551835.42100@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
HI Terry!

Anyone that logs on to my secured, wireless network need only a
code...
a long one for that matter :)
I cannot even get into the router or access point Set Up screen
anymore
without turning off the internet..errrrgggg!!!!
I believe the WEP is normally on..... I am on the wireless internet
via
my laptop as I write type this...

THANKS for helping me out here.... I just wish it would go back to
normal :(


Sven wrote:
I was going to ask if WEP was even turned on, based on the
statement
family
can all log on when they come over. I have a USB stick with my key
on
it
for
when friends/family come over with laptops.

Is WEP normally on or off?

--
Sven
MVP - Mobile Devices
"tc" <terrycassidy@xxxxxxx> wrote in message
news:OXI0mhdMHHA.5000@xxxxxxxxxxxxxxxxxxxxxxx
Sure sounds like a mix up in the security settings (or maybe the
MAC
address is blocked). Can you temporarily disable WEP or WPA on
the
router
and try for an address?
Terry
"arena" <arena@xxxxxxxxxxx> wrote in message
news:1168117856.439124.309040@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I am trying everything right now... However, I am still getting
that
same message... There is one thing that is strange to me.... I
am
now
getting this reading in my HP Wi-Fi Manager:

Network Information:
DHCP: Enable
IP Address: 0.0.1.41 (This could change to nothing withing
minutes!)
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1

When I hit the "IP Renew" button... there is that dang message
again!
"Unable to obtain a server- assigned IP address Try again later
or
enter an IP address in Network Setting"




arena wrote:
HI Sven!

When this started, no. I made no changes at all. When I
started
troubleshooting, yes I made changes...but, I put all the
changes
back
to "default" and then back to "my original settings" when
nothing
seem
to work.

Yes, I have 3 laptops working well on my wireless access point
at
present. When my family (we are all geeks here LOL) is over
with
their
laptops/PDAs, they can log on with no problem. I also have two
Desktop
computers on a router and that is working well for me too.

I uploaded the files from "CAM" to my PDA and found it to be
something
I see as complicated :( I will try again later when I have
more
patience... I am pulling at my hair at this point! LOL Thanks
for
your
reply!

Arena


Sven wrote:
Have you made any changes to your security settings on your
Access
Point?
While the AP and PPC radios can connect and show good signal
strength,
DHCP
requires that the PPC be able to ask for addresses and the
DHCP
server
(usually your AP/router, or Wireless Router) be able to
respond
with
them.
If the security isn't right, then the request can't get
through.
Security
problems could be that it got turned on and wasn't before, or
that
something
happened to change the Key on either the router or PPC. Do
you
have
WEP or
WPA turned on, and do other devices still work? Laptop,
something?
I
am not
sure if when using DHCP that the addresses are actually
filled
in
on
the
screen on an HP. Anyone confirm that they normally are?

A good tool to see your settings is vXIPConfig, or vXUtil,
both
available at
www.cam.com for free.


--
Sven








.

Relevant Pages

  • Re: this sucks/connection issue
    ... just the same but now i lost my internet connection. ... network resources. ... Yes my cable is nice and secure, modem and router is fine, as I ...
    (alt.os.windows-xp)
  • Re: this sucks/connection issue
    ... just the same but now i lost my internet connection. ... network resources. ... Yes my cable is nice and secure, modem and router is fine, as I ...
    (alt.os.windows-xp)
  • Re: this sucks/connection issue
    ... the same but now i lost my internet connection. ... computer is not visible on the network, i might be screwed but oh ... Yes my cable is nice and secure, modem and router is fine, as I am ...
    (alt.os.windows-xp)
  • Re: this sucks/connection issue
    ... the same but now i lost my internet connection. ... computer is not visible on the network, i might be screwed but oh ... Yes my cable is nice and secure, modem and router is fine, as I am ...
    (alt.os.windows-xp)
  • Re: this sucks/connection issue
    ... the same but now i lost my internet connection. ... computer is not visible on the network, i might be screwed but oh ... Yes my cable is nice and secure, modem and router is fine, as I am ...
    (alt.os.windows-xp)