Re: WM 5.0 8125 Clock & Alarm issues

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

I would like to know how that worked. I just started having this
problem today and I am on the new Cingular 2.25 ROM. I cannot shut off
my alarms and as I recently upgraded my ROM I would really rather not
go through reinstalling everything again. Any other tips?

JackG wrote:
At the recommendation of Cingular, I upgraded my ROM from v1.8x to 2.25.
Note that this requires a hard reboot (you lose all none stored data).
This upgrade seemed to resolve the alarm problem and a performance
degradation performance issues I experienced.
Here is the link to upgrade
http://www.htcamerica.net/support/software_downloads_8125
- JackG
"ricky" <ricky@xxxxxxxxx> wrote in message
news:OMZi0F1mGHA.2204@xxxxxxxxxxxxxxxxxxxxxxx
had a similar problem, all I can advise is don't use the Alarm function,
use
reminders instead.....

Solved the problem, by doing a rest on the device.


"JackG" <jackg@xxxxxxxxxxxxx> wrote in message
news:OJRPNTvmGHA.3796@xxxxxxxxxxxxxxxxxxxxxxx
This is the second Cingular 8125 exhibiting the same problem, so I am no
longer suspecting a hardware issue.
Repro:
Select Clock & Alarms
Set an alarm for Sun-Sat at 11pm
If your lucky the alarm will go off (randomly works).
Now for the fun - NOT!
Change the alaram to be 7am for use as an Alarm clock.
Now go to bed at 10pm.
The old alarm will continue to go off at 11pm, even after several soft
resets of the device.





.

Relevant Pages

  • Re: WM 5.0 8125 Clock & Alarm issues
    ... This upgrade seemed to resolve the alarm problem and a performance ... degradation performance issues I experienced. ... Change the alaram to be 7am for use as an Alarm clock. ...
    (microsoft.public.pocketpc)
  • Late alarms and uninterruptible ANIMATE
    ... To test this I made an executable alarm ... If I run this, and while the two GROBs are alternating I hit ON, ... Sometimes it interrupts, as desired. ... the next ROM? ...
    (comp.sys.hp48)
  • Re: HP50G - Alarm does not always wake up the calculator
    ... I am using the alarm feature of the HP50G and I found, that an elapsed alarm does not always wake up the calculator. ... If the calculator misses the wakeup time it starts the alarm program ... I'm using ROM version HP50-C Rev.2.09, but the Problem was already existing at ROM 2.08. ... In this Newsgroup I found some statements mentioning problems like this. ...
    (comp.sys.hp48)
  • Re: Saving clock format on RISC OS 6
    ... keep a specific display then Alarm$Options needs setting by ... The setting in Alarm's Setup is transient, ... Alarm 2.79 in Select 4i2 is no different from any ... Here in RISC OS v4.39!Alarm v2.76 is in ROM and active. ...
    (comp.sys.acorn.apps)
  • hp HW6925 cant turn off alarm
    ... I've been using an HP6925 ROM version 1.30CIN.03 ENG for a year. ... the alarm started going off and I can't figure out how to turn it off. ... anything besides a hard reset turn this off? ...
    (microsoft.public.pocketpc)