Re: Motorola MPx300

These files are in ROM, not RAM and don't do anything that I can tell. So
basically .. is there any way to delete ROM? Its not possible, right?


"Werner "Menneisyys" Ruotsalainen [MVP - Windows - Mobile Devices]"
<!ei.maileja@kiitos!> wrote in message
news:e9FYYGrkGHA.1264@xxxxxxxxxxxxxxxxxxxxxxx
Without having access to the particular device, a generic answer: you can,
in general, freely delete anything that is in RAM; that is, deletable.
RAM-based ringtones are like this. Just make sure you make a backup before
doing this so that you can restore your previous state if you delete
something vital.



--


--
Werner "Menneisyys" Ruotsalainen - Microsoft MVP - Windows - Mobile
Devices
Please see the Pocket PC Mag Expert Blog (including mine) at
http://www.pocketpcmag.com/blogs/ - you will definitely like it.


"Diane aka Whatever" <k@xxxxxxxxx> wrote in message
news:qZadnVbR_ISdgQnZnZ2dnUVZ_rOdnZ2d@xxxxxxxxxxxxxxx
Not sure where to post this, so I will try a few NG's. I will also check
them all so it will help if you tell me in which group my posts belong.
I have the Motorola MPx300 phone. Running Windows Mobile 2003 Second
Edition v 4.21.1088 [build 14342.2.5.0] The ppc tells me that I have 27
megs approx. and 17 megs en flash memory. I have a storage card where I
store almost everything.

When I run Media player for example, I get an error 'not enough memory to
....' when nothing else is running.

So I looked at what I have free and that is only about 8 megs. I opened
file explorer and find lots of files that don't seem to be associated
with anything. Files such as 'bobbleheads' And there are lots of them.
Also there are a bunch that say 'Fun Clips.' And others With the word
'occasions.' Some of these have dupes. the are in rom and I cant delete
them.

I have updated the rom and I cant help but wonder if the files from the
original setup get removed or? Basically I am just curious as to why I
have not enough memory to do the simple thing like run media player etc.
Unfortunately I can't even check with motorola because this is not a
supported device.

diane





.

Relevant Pages

  • Re: OTF Encryption? Basic PPC2003 se security questions? (newbie)
    ... > since rom files can be displaced by replacement files. ... This suggests that the loader looks at a "replacement" folder before ... > added programs can be loaded into ram or memory cards, ... > hard reset the device which erases all ram content. ...
    (microsoft.public.pocketpc)
  • Re: Difference between ROM and RAM
    ... to configure their memory the way they want would be good. ... Finally, if you code for a requirement of 128MB of RAM, you'll really limit ... RAM and ROM up until ... I'm programming application for Pocket PC and I'm ...
    (microsoft.public.pocketpc)
  • Re: AES and dynamic table generation
    ... >> multithreaded, portable applications. ... > A microcontroller with little ROM and plenty of RAM? ... where the only memory available is stack based RAM. ...
    (sci.crypt)
  • ColdFire M5271 use 52Kb SRAM for C-stack to test DRAM at OS boot ?
    ... allocate C-stack there to test DRAM at the boot time? ... allocating stack on DRAM and jumping over it during DRAM test - anybody ... I need to run the RAM test before the bootrom copies itself into RAM, ... At this point the system is still executing instructions out of ROM. ...
    (comp.arch.embedded)
  • Re: clientaz.dll
    ... Having my first computer for 2 months now, I don't know much about RAM and ... ROM other than - the more, ... program, I interpret it saying that I need more RAM! ... At the top of the screen it said: RAM Usage 99%, Virtual Memory Usage ...
    (microsoft.public.security.virus)
Loading