Re: with WLAN to internet

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Are you using a WEP/WPA key on your wireless router? Is that inputted into
your WiFi settings on your device?

Your IP address, I'm assuming, is coming from your router. It would be the
same as your desktop PC. How does your desktop PC get it's IP address?

No, upgrading your OS wouldn't help matters.

Regards,


--
Clinton Fitch [MVP-Mobile Devices]

Clinton Fitch (Dot) Com! ~ http://www.clintonfitch.com
HPC:Factor ~ http://www.hpcfactor.com
Read My Blog! ~ http://www.pocketpcmag.com/blogs/index.php?blog=24

Clinton Fitch (Dot) Com! & HPC:Factor are Smartphone & Pocket PC Magazine
"Best Sites"!


"pavel" <pavel.ferenc@xxxxxxxxx> wrote in message
news:1147895400.100976.104500@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Clinton,
thank you very much for your reply
it should work, but it doesn't. The LED on the card is lighting and the
card seems to work fine. If I go to
settings>connections>advanced>network card- I can see that my
connection is "available"
is there anything i could have forgotten about in my router setting?
What about my IP- do I enter it anywhere? In such case I would expect
warning of a different kind- concerning bad settings or something like
this. But after I did what you had told me (i.e. verify that my
Internet Connection should use "MyISP"-) i still get message saying
"unable to connect: You have no modem entries created, AND no network
card present." In addition to that, I dont understand the word AND in
the message. What modem are they talking about? I dont need one, do I?
Isnt my WLAN card communicating with my ADSL router/modem enough? BTW
do you think upgrading OS could help? If so, is it possible to upgrade
OS (mobile windows 2003) on PPC?
thanks a lot
Pavel



.

Relevant Pages

  • Re: Download corruption - anyone advise please?
    ... those of the laptop and router. ... I'm not sure where you'd find those settings in ... Just plugged in an Intel 100 card and send the same email message to myself on 3 different addresses. ...
    (uk.comp.homebuilt)
  • Re: [SLE] Wireless routing
    ... > I'm setting up a laptop with a wireless card. ... What I can't do is get out through the router. ... > When I do ifstatus, all seems OK: gateway points to the router, DNS ... settings that I saw on the desktop, ...
    (SuSE)
  • Re: BGP with OpenBGPd.
    ... hardware at your fingertips if a router fails. ... Install on another flash card and just reboot to the new card? ... I insert the backup card into one of my ... Upgrading the daemons does not happen often, ...
    (freebsd-isp)
  • Re: Enabling the Intel 82562ET Nic
    ... Second, I unplugged the unit and put it in the basement next to my router, and plugged it into the router with a new cable. ... upgrading the driver to 3.5.14 ... During the standard YaST install procedure, the card is detected, and seemingly correctly configures the module name to e100. ... The loopback interface is up and I can ping localhost. ...
    (comp.os.linux.networking)
  • Before I buy a new WLAN card...
    ... I have the Verizon One phone for my router and an HP ... I was using my laptop via wireless when I lost ... they claimed it was my WLAN card. ... If I let the wireless get the settings automatically, ...
    (alt.internet.wireless)