Re: PPC 2003 - Send Mail Problem

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Thanks Craig, none of your suggestions are the issue in my case :(

Pete

"Craig Enders" <craigenders@xxxxxxxxxxx> wrote in message
news:OUDuzgodFHA.1448@xxxxxxxxxxxxxxxxxxxxxxx
> Have you entered anything in the Domain field? If you have try leaving it
> blank.
>
> Is the box checked for "Outgoing e-mail server requires authentication"?
> It
> is worth a try to just see if needs it for some reason.
>
> Is the box checked for "Require SSL connection"? Same as above, worth a
> try.
>
> Not too much help but who knows.
>
> Craig
>
>
> "Pete" <pete@xxxxxxxxxxx> wrote in message
> news:afWdnZm9HbGQzirfRVn-2A@xxxxxxxxxxxxxx
>> Configured MESSAGING SW on PPC via wireless (WiFI) through my home
> router).
>> POP3 incoming works fine, however SMTP (outgoing) does not work. Error
>> messages talks about missing wirless coverage or problem with the server
>> settings.
>>
>> Its certainly not a coverage problem (since receiving e-mail works just
>> fine) and I checked the settings several times. I also used my default
> SMTP
>> server which does not need any authentication, and a company SMTP server
>> with my credentials (works just fine with outlook on PC [wirelss and
>> wired]).
>>
>> Any logfiles I could check? Any other know issues in this area?
>>
>> Thanks for your help
>>
>> Pete
>>
>>
>
>


.

Relevant Pages

  • Email Fails
    ... settings are correct and they were able to get in before. ... and I ordered more Licenses. ... Pete ...
    (microsoft.public.windows.server.sbs)
  • Re: Intelligent Message Filter not assigning SCL rating
    ... "Craig T" wrote in message ... > The SCL field is actually blank. ... > I have reinstalled IMF, ... > I even reinstalled the entire server but got the exact same results. ...
    (microsoft.public.exchange.admin)
  • Re: Intelligent Message Filter not assigning SCL rating
    ... Craig and I worked within PSS to troubleshoot this to a bug. ... The IMF doesn't seem to be assigning SCL levels at all. ... >>> I even reinstalled the entire server but got the exact same results. ...
    (microsoft.public.exchange.admin)
  • Re: Active Directory Question
    ... "Craig Matchan" wrote in message ... > requirements from this paper I would be looking at a 16 dual/quad CPU ... >> is that on a single AD tree on a single server or do you need multiple AD ...
    (microsoft.public.windows.server.active_directory)
  • Re: Can not Email 17mb file outside our SMTP connector
    ... "There are seldom good technological solutions to behavioral problems." ... "Craig" wrote in message ... Make sure you have protocol logging enabled on the bridgehead server responsible for sending as configured in your SMTP Connector, and then see if you can find the bounce. ...
    (microsoft.public.exchange.admin)