Re: AvantGo - when does it synchronize?

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: Paulo Reichert (paulo_at_reichert.co.uk)
Date: 04/20/04


Date: Tue, 20 Apr 2004 09:18:31 +0200

Answers inline:

"Terry Pinnell" <terrypin@dial.pipex.com> wrote in message
news:3te780diri9gk9pettlb36i1caoadfvq72@4ax.com...
> "Paulo Reichert" <paulo@reichert.co.uk> wrote:
>
> >Actually, your AvantGo channels can be synchronized mainly in two ways:
> >
> >You can configure ActiveSync to synchronize it by going in Options -->
Sync
> >Options and selecting AvantGo on the MobileDevice list box. It will make
> >that every time you synchronize your calendar, messages, tasks and etc it
> >will synchronize also AvantGo.
> >
> >You can also synchronize from inside the Pocket PC through a wireless
> >internet connection or the pass through connection when connected to
> >ActiveSync. To do so, tap Start --> Settings --> Connections --> AvantGo
> >Connect --> Sync All.
> >
> >Hope it helps.
>
> Thanks Paulo. Your second part, synchronizing manually from the PPC is
> straightforward. But, of course, that's a manual process (and fairly
> long-winded at that).
>
> But could you clarify the first part, working from the PC. To be
> honest, I can't get my mind around the way ActiveSync handles
> connection and server settings - it seems extraordinarily complex to
> me. (That's partly because even now, I still don't really know when
> the use of the word 'connection' means connection from PPC to PC (via
> cradle), connection from PC desktop to internet server, or connection
> from PPC via BT etc to internet server. But that's another issue!)

In fact, connection means both (in my opinion). You have one connection
stabilished between your desktop PC and the PDA, and this connection is
managed by ActiveSync. Then you have another connection that is from your PC
to the internet, and that one is managed by Windows.

If you use Bluetooth, you can have an emulated serial connection to
ActiveSync that will work in the same way as if your device was in the
cradle. Otherwise, you can use it as a private area network via Bluetooth
and it works as a network connection.

What happens when you have your PDA connected via ActiveSync to your desktop
computer is that ActiveSync makes a sort of NAT from the PDA connection to
the internet connection, so, you can also access the internet from your PDA
using your desktop connection.
>
> If I use Options, under the Sync Options tab I see this:
> http://www.terrypin.dial.pipex.com/Misc/AS1.gif
> Does that look OK, for a start please? I'm puzzled by that last box.
> 'Enable synchronization with a server.' My AvantGo is still getting
> updated each morning (presumably triggered by the soft reset that
> occurs after my regular Sprite backup), yet that box is unchecked.
>

Yes, this setting is OK to allow you to synchronize your AvantGo channels
with your Pocket PC. The check box at the bottom is about synchronizing your
Pocket PC with an Exchange Server, so, it is not necessary to synchronize
AvantGo.

> OK, I have AvantGo checked. But I don't follow what you mean by "It
> will make that every time you synchronize your calendar, messages,
> tasks and etc it will synchronize also AvantGo." Under Schedule, I
> have that set to Continuous, as you see here:
> http://www.terrypin.dial.pipex.com/Misc/AS2.gif
> Yet AvantGo does not get updated continuously. It only seems to get
> updated if I do a manual synchronize later in the day (or a soft reset
> of course).
>

In fact, if you have continuous synchronization from your PDA to your
desktop computer it doesn't synchronize automatically AvantGo. It will
happen only when you manually select to synchronize. I don't know a way for
ActiveSync to synchronize AvantGo channels continuously, even because it
would demand your computer to be always searching for new content on the
channels.

> In case it's relevant, I also show a couple of my AvantGo settings:
> http://www.terrypin.dial.pipex.com/Misc/AG1.gif
> http://www.terrypin.dial.pipex.com/Misc/AG2.gif
> On that last one, for instance, I'm also confused about the last box
> 'Refresh all content at next sync'. Here again, I *am* getting fresh
> BBC news from AG each morning, yet I don't have that box checked.
>

The "Refresh all content at the next sync" option means that all the
previously saved content in your Pocket PC will be deleted and re-downloaded
at the next synchronization. If you don't select that option, your Pocket PC
will still get updated, but it will be only a refresh of the saved contents.
This is the most bandwidth saving option because you keep the contents that
were previously donwloaded but are current and download only the new
contents.

> All very puzzling!
>
> --
> Terry, West Sussex, UK
> Using iPAQ 2210 with WM2003.
>
>

Hope it helps.

Cheers,
Paulo.



Relevant Pages

  • Re: Error while syncing
    ... With your iPAQ disconnected, go into Active Sync and click Tools> Options. ... Verify that Avantgo isn't checked in the list of applications to ... then try to synchronize again. ... see the Microsoft ActiveSync> Troubleshooter in Microsoft ActiveSync Help on you destop computer" ...
    (microsoft.public.pocketpc)
  • Re: Calendar no longer working on Mobile client
    ... OMA doesn't synchronize anything; ... WM5 and WM6 clients, using GPRS push connection. ... If connected via activesync and a USB cable to a PC, ...
    (microsoft.public.exchange.clients)
  • Re: AvantGo - when does it synchronize?
    ... >Options and selecting AvantGo on the MobileDevice list box. ... >that every time you synchronize your calendar, messages, tasks and etc it ... >internet connection or the pass through connection when connected to ...
    (microsoft.public.pocketpc)
  • Re: dont synchronize
    ... www.microsoft.com/mobile and look for the Active Sync connection ... Since yesterday that I can't synchronize my computer with thw WM5 I-mate ... I already made a hard reset in the PDA, ... When I connect the PDA to the computer the ActiveSync it ...
    (microsoft.public.pocketpc.activesync)
  • Re: Problems on ActiveSync on CE4.2 using UART
    ... I was able to get ActiveSync up finally. ... And it works with BTUART on PXA263, with connection RX,TX,CTS and RTS. ... how to synchronize better? ...
    (microsoft.public.windowsce.platbuilder)