Re: How do you add GPS to a PDA?

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Darren Griffin - PocketGPSWorld (darren_at_pocketgpsworld.invalid)
Date: 02/10/04


Date: Tue, 10 Feb 2004 07:34:49 -0000

Simon wrote:
> How do you add GPS to a PDA?
>
> Is there GPS receiver a stanard plug, or does it depend on the make of
> pocket pc?
>
> Is it possible to power the gps&pocket pc through a single power lead?

It depends on which PDA you have. You have the choice of CF Slot GPS, Mouse
type which connects via the PocketPC's serial/sync port or Bluetooth if your
PocketPC supports it.

If you chose a Mouse type GPS then they all come with a 12v power lead which
powers both the GPS receiver and PDA but the downside is that this
combination can only be used where 12v power is available.

For reviews of all the options and guides etc pay us a visit.

-- 
Darren Griffin
Pocket GPS World - http://www.pocketgpsworld.com
The Premier GPS Resource for News, Reviews and Forums


Relevant Pages

  • Re: Does this sound right? - NEMA question
    ... The GPS "Data Out" line goes directly ... the same screw that GPS power - connects to. ... It sounds like I can expect to hear the GPS talking to the radio in ... When I took over her electronics suite, ...
    (rec.boats.cruising)
  • Re: GPS Power
    ... Note that the rectifier circuit has no regulation - you'd get very high DC voltages at full throttle if you connected it direct to the sled's lighting coil. ... I'm assuming my sled has a regulator to keep voltages to the bulbs down, even though it has no battery - but I'll be taking a run with my meter hooked up so I know what I'm dealing with before taking any risks with my new GPS! ... you can use the original GPS power cord to reduce the voltage to the correct level. ... The GPS unit has flat brass buttons on the back for power in and audio out, and there's no way to make reliable electrical contact without clipping it into a cradle with spring loaded contacts - and the only way to get the right cradle is to buy another car adapter for $$$. ...
    (rec.sport.snowmobiles)
  • Re: iPAQ 210/iPAQ 211 after 1 week of use
    ... Connection via DUN and you will not need to use the "Bluetooth Phone ... It only has one port that can be used for a BT GPS and you can't use the ... If you hold the power button down it will turn itself back on as soon as ...
    (microsoft.public.pocketpc)
  • Re: iPAQ 210/iPAQ 211 after 1 week of use
    ... Connection via DUN and you will not need to use the "Bluetooth Phone ... It only has one port that can be used for a BT GPS and you can't use the ... If you hold the power button down it will turn itself back on as soon as ...
    (microsoft.public.pocketpc)
  • Re: Connect Palm M515 to Holux USB GPS Receiver
    ... I do understand that the GPS draws power from the USB, ... PDA would not provide sufficient power. ... I assume that a GPS with a PS2 ... - Supply power to the GPS receiver (either from the Palm or some ...
    (sci.geo.satellite-nav)