Re: WPA-TSK connection problem

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Hi Andy

Is this problem because of a bad implementation on cisco's side or microsoft?

What exactly do I loose when I switch off QOS. Does it mean, if e.g VOIP QOS
settings are in place that those would also be disabled.

How did you find out about the qos settings? On the web admin page of our
1131AG it only said failed to authenticate and I don't have any idea on how
to get a more detailed log.

Odyssey Client works so far, but I'd rather use the tools like hitchhiker or
the microsoft.

Any more information would be very helpful.

Thanks.

Regards,

Patrick

"Andy" wrote:

correction to configuration:

interface Dot11Radio0
no dot11 qos mode

Andy


"Andy" <aftersun@xxxxxxxxxxxxxx> wrote in message
news:VLudnb5Mtuc2KdbZnZ2dnUVZ8s6dnZ2d@xxxxxxxxx
What access points are you using?

If they are Cisco AP's running IOS then the fix is to disable QoS on the
Radio interface.

interface Dot11Radio0
no qos mode
!

This is apparently a known issue with PDA's and Cisco Access Points. I
had the same issue with 2 Cisco AP's (350 with 11b & an 1100 with 11g) -
WEP would work fine but WPA wouldn't (its WPA-PSK by the way not TSK).
After a fair bit of searching on CCO I found a note on some release notes
about Windows Mobile PDA's.

HTH

Andy

"Klaus Blumer" <no-spam.kblumer@xxxxxx> wrote in message
news:e287h5$lvd$1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi there,


I've recently bougth a Dell Axim X51v pda, with MS Windows Mobile 5. The
problem is the following:

I can't connect to a wireless network using WPA-TSK security. WEP works,
but that isn't safe enought. Not for the pda but the rest of the network.
The network key I use is correct because it doesn't disconnect (it does
when I type anyting wrong). However it keeps trying to connect and keeps
doing so until the battery is emty.

Does anyone has a clue? I can't find any updates or patches for win
mobile 5.

Thanks and regards,
Klaus





.

Relevant Pages

  • Re: windows xp and bandwith available
    ... All of the bandwidth is available to you, Cristina, and none of it is ... Please see this Microsoft Knowledge Base ... Windows XP Quality of Service (QoS) enhancements and behavior ...
    (microsoft.public.windowsxp.network_web)
  • Re: Windows Mobile 5 PPTP VPN problem
    ... network path was not found" even if I am on the local lan. ... Microsoft CSS Online Newsgroup Support ... Windows Mobile 5 PPTP VPN problem ...
    (microsoft.public.windows.server.sbs)
  • Re: implementing qos help
    ... Most modern networks don't follow the IntServ model, and really for the reasons you listed. ... It addresses the issue of crossing network domains, that is, networks not under your administrative control. ... End-to-end QoS can be challenge in these environments, but because DiffServ is implemented in a per-hop-behavior fashion, you have a much more scalable scenario. ... Now, as for the WAN port, you can influence the outbound interface queues for sure as different packet sizes and associated interface delays change things just a bit. ...
    (comp.dcom.sys.cisco)
  • Re: QoS Packet Handling
    ... TCP Receive Window and Max Acks ... the Network Utilization averages about 0.03%. ... When I disable QoS Packet Handler in Network Connections, ...
    (microsoft.public.windowsxp.network_web)
  • Re: QoS Packet Handling
    ... Simply unchecking QoS does not turn it off and disabling it in services.msc does not prevent it from somehow restarting. ... When I disable QoS Packet Handler in Network Connections, ... going in/out but placing a priority to different Internet protocol. ...
    (microsoft.public.windowsxp.network_web)