Re: WPA-TSK connection problem

correction to configuration:

interface Dot11Radio0
no dot11 qos mode

Andy


"Andy" <aftersun@xxxxxxxxxxxxxx> wrote in message
news:VLudnb5Mtuc2KdbZnZ2dnUVZ8s6dnZ2d@xxxxxxxxx
What access points are you using?

If they are Cisco AP's running IOS then the fix is to disable QoS on the
Radio interface.

interface Dot11Radio0
no qos mode
!

This is apparently a known issue with PDA's and Cisco Access Points. I
had the same issue with 2 Cisco AP's (350 with 11b & an 1100 with 11g) -
WEP would work fine but WPA wouldn't (its WPA-PSK by the way not TSK).
After a fair bit of searching on CCO I found a note on some release notes
about Windows Mobile PDA's.

HTH

Andy

"Klaus Blumer" <no-spam.kblumer@xxxxxx> wrote in message
news:e287h5$lvd$1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi there,


I've recently bougth a Dell Axim X51v pda, with MS Windows Mobile 5. The
problem is the following:

I can't connect to a wireless network using WPA-TSK security. WEP works,
but that isn't safe enought. Not for the pda but the rest of the network.
The network key I use is correct because it doesn't disconnect (it does
when I type anyting wrong). However it keeps trying to connect and keeps
doing so until the battery is emty.

Does anyone has a clue? I can't find any updates or patches for win
mobile 5.

Thanks and regards,
Klaus




.

Relevant Pages