Re: Network Connection with Bluetooth



There are two ways of connecting a Pocket PC to the computer over Bluetooth.

When the configuration on Bluetooth is set to "Allow Internet Access" you
must use ICS. Since you're already using ICS in your network this option
should not be used.

The other option is setting the Bluetooth configuration to "Allow Private
Network". In this case you should have a DHCP or manually enter an IP on
your Pocket PC. When connecting from the Pocket PC to your computer it will
be on the network, but for it to have full access you should bridge the
connections on your computer. Also, enter the DNS server address on your
Pocket PC.

--
Mauricio Freitas, Microsoft MVP Mobile Devices
http://www.geekzone.co.nz
Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449
Software for Pocket PC and Smartphone: http://www.geekzone.co.nz/store
Software for Pocket PC directly on your device:
http://www.geekzone.co.nz/inhand.asp

"JMCS" <jcw2000@xxxxxxxxxxxxxxx> wrote in message
news:e4cA8kAeFHA.2692@xxxxxxxxxxxxxxxxxxxxxxx
> Hello,
>
> I have a HP 2215, and my computer with dlink bluetooh adapater, my
> configuration is this.
>
> 1. My Bluetooth adapater have
>
> IP Address 192.168.0.11
> Subnet Mask 255.255.255.0
>
> 2. My Computer have
>
> IP Adress 192.168.0.10
> Subnet Mask 255.255.255.0
>
> The Network in my company have this configuracion:
>
> All the PC have 192.168.0.x where X is a secuencial number, we don't use a
> DHCP server
>
> Whe only have 10 PC,
>
> 192.168.0.1 Server
> 192.168.0.2 ICS(Internet Connection Sharing),
> 192.168.0.3 - 192.168.0.9 Users Computers
> 192.168.0.10 Windows XP Computer SP2 (My Computer)
> 192.168.0.11 HP 2215
>
>
>
> MY PROBLEM
> if i connect my HP 2215 with the PC i can't connect (ping, open files,
> etc), but if i disconnect the lan cable from my computer, i can connect.
>
> THANKS FOR YOUR HELP
>
>
>
>


.



Relevant Pages

  • Re: Network Connection with Bluetooth
    ... > There are two ways of connecting a Pocket PC to the computer over ... > When the configuration on Bluetooth is set to "Allow Internet Access" you ... > The other option is setting the Bluetooth configuration to "Allow Private ... When connecting from the Pocket PC to your computer it ...
    (microsoft.public.pocketpc.wireless)
  • Re: Cant connect a HP iPaq w/windows mobile 2003, to my 2wire home portal 1800HW
    ... > broadcast SSID and it is not found by my pocket PC. ... > Ip Mananger program, and according to this I get only an IP adress ... > the message of connecting and nothing else happens. ... > Home Portal and a fake SSID not according to configuration. ...
    (microsoft.public.pocketpc)
  • Re: ICS bluetooth problem
    ... server on the Bluetooth network adapter on your computer. ... computer and try connecting again. ... > I have set up a Internet connection sharing. ... I want to connect my Pocket> PC ...
    (microsoft.public.pocketpc.wireless)
  • Cant connect a HP iPaq w/windows mobile 2003, to my 2wire home portal 1800HW
    ... I've been trying to connect via the WiFi protocol my pocket pc ... some HomePortals of different users (obviously I don't connect them ... the message of connecting and nothing else happens. ... Home Portal and a fake SSID not according to configuration. ...
    (microsoft.public.pocketpc)
  • Re: Emails sending from PocketPC via cell phone
    ... Connecting the Pocket PC to a Bluetooth phone is straight forward but... ...
    (microsoft.public.pocketpc.wireless)