Re: Active Sync - Exch Server behind Firewall
- From: "Eric Hicks [MVP]" <i'm@xxxxxxxxxxx>
- Date: Wed, 30 Mar 2005 12:17:05 -0500
Not much is needed to sync directly with exchange 2003. Here
(http://www.geekzone.co.nz/content.asp?contentid=4048) is a great writeup on
it by Mauricio Freitas. On the firewall side all you need to open is port
80 if you're not using ssl(not recommended) or port 443 for use with ssl.
--
--
Eric Hicks [That_Kid] (MS-MVP Mobile Devices)
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no
rights...
"Scott Townsend" <scott-i@.-N0-SPAMplease.enm.com> wrote in message
news:us7zXnUNFHA.1500@xxxxxxxxxxxxxxxxxxxxxxx
> 1.) Yes, we have Exch2k3 and Mobile Services installed. Though I'm not
> really sure how it works and what port/protocol to open on the PIX to
> allow the Sync.
>
> 2.) We can use a Standard Win2K Pro or XP Pro workstation and use the
> Built-in PPTP Client and connect to our PIX just fine. When I configured
> the PPC with the same settings, it could not connect.
>
> 3.) I'm to cheap to Pay $100 for a client. (-; (or 100 euros, what ever
> the equivalent is) Seems like Cisco should have a PPC Client out.
>
> Thank you for your reply and assistance!
>
> Scott<-
>
>
> "Allan Boegild Pedersen" <abp@xxxxxxxxxxxxxxxxxx> wrote in message
> news:%23K9ugKKNFHA.204@xxxxxxxxxxxxxxxxxxxxxxx
>> Hi
>>
>> There are some diffrent ways:
>>
>> 1. If you are using exchange server 2003 you can syncronise directly to
>> the server by publishing Mobile information server in the PIX Mobile
>> information server is a part of exchange 2003
>> 2. using PPTP, must be possible to have the pix emulate ordinary MS PPTP,
>> dont know how
>> 3. you can use Movian VPN client instead of the Cisco client it can be
>> found here http://www.cites.uiuc.edu/vpn/movian-install.html
>>
>> Hope it helps
>> --
>>
>> Regards,
>> Allan Boegild Pedersen
>>
>> "Scott Townsend" <scott-i@.-N0-SPAMplease.enm.com> skrev i en meddelelse
>> news:evYey89MFHA.164@xxxxxxxxxxxxxxxxxxxxxxx
>>>I have a Siemens SX66 WM2003 , I can use my WiFi Connection inside our
>>>network to connect to our Exchange server and Sync with no problems.
>>>
>>> I'd like to be able to connect to our Exchange Server and Sync anywhere
>>> on the internet. We have a PIX Firewall with two types of VPN, PPTP and
>>> IPSec with Certificates. I can't seem to get the PPC to connect to our
>>> PIX with the PPTP and without a Cisco Client for IPSec I'm not sure how
>>> that works...
>>>
>>> So how can I get my PPC to VPN into our Network?
>>>
>>> Thanks,
>>> Scott<-
>>>
>>
>>
>
>
.
- References:
- Re: Active Sync - Exch Server behind Firewall
- From: Scott Townsend
- Re: Active Sync - Exch Server behind Firewall
- Prev by Date: Re: Active Sync - Exch Server behind Firewall
- Next by Date: Setting up WPA for PocketPC 2003
- Previous by thread: Re: Active Sync - Exch Server behind Firewall
- Next by thread: Setting up WPA for PocketPC 2003
- Index(es):
Relevant Pages
|
Loading
