Re: ipaq3600 + sandisk

From: Helio Diamant - MS/MVP, Mobile Devices (helio_at_nospam.pocketpcfreak.com)
Date: 08/31/04 

Date: Tue, 31 Aug 2004 09:44:03 +0200

Regarding item 1, either your provider is not allowing access from other
networks (as an anti-spam policy), or you would need to use for the outgoing
server a different username-password than those used for the incoming
server. PPC doesn't offer a solution for that in the standard inbox today,
maybe one of the commercial packages does.

Regarding item number 2, I suggest you check if your WEP settings are
exactly the same in the AP and in the PPC. It could be a small mistake in
the WEP Key, or could be some small setting like trying to use Shared-keys
while the AP is set for Open Network. I have not found any situation in
which WEP did not work with ANY card that was not connected to a slight
mistake in the definitions. 

-- 
Helio Diamant - MS/MVP Mobile Devices
http://www.pocketpcfreak.com
"jm" <SPAMSUCKSjim-AT-stupiddog-DOT-net> wrote in message
news:eoYJxrujEHA.3608@TK2MSFTNGP09.phx.gbl...
> Greetings,
>
> Well... I decided to give the sandisk WiFi+128m a try. It sort of works.
But
> there are a couple of problems. I've already contacted their tech-support
> (regarding #2) and the most help I could get was a suggestion to try
> installing the driver that's on their website, I'll try that later.
> Hopefully someone here may have some answers -
>
> 1) When the WiFi card is setup, connected and my router has given out an
IP
> address everything works fine (browser, network share access) except for
the
> Inbox. I can recieve email but not send. An error message displays
reporting
> that I don't have access to the server or some setting is incorrect. My
> email server expects me to login and supply a password for sending email.
> With that in mind I checked the box in the Inbox setup that seems to
> indicate that it will use the "retrieve" email setting when sending.
>
> 2) The card only works properly (light stops blinking, IP address is
handed
> out, etc) if WEP is OFF at the router (netgear). If WEP is on then the
card
> will not connect.
>
> Thanks in advance.....
> jm
>
>

Relevant Pages

  • Re: netstat - negative number of queues free
    ... > This is the integrated Broadcom gigabit Ethernet card. ... > driver would either have been included in 5.0.7 or, more likely, ... > $cable a few times under high network load. ... > The users access the data by telnetting to the server and running ...
    (comp.unix.sco.misc)
  • Windows Server 2003 - Multiple IP Routing
    ... I am new to the Windows server Software. ... address tables/Lan Cards to one internal network/Lan Card ... Example IP's of external network ...
    (microsoft.public.windows.server.general)
  • clients joining a domain
    ... On 2 of the workstations they have a 2nd network ... card that attaches to a router that gets them on the internet. ... pointed to the builtin server router address. ... These 2 machines will not join the domain due to a dns lookup ...
    (microsoft.public.windows.server.active_directory)
  • Re: Multihomed RRAS Configurations
    ... The second NIC card I assigned a static IP ... the Lan using the RRAS server and VPN. ... > configures to the internal network card not the external network card. ...
    (microsoft.public.win2000.ras_routing)
  • Re: HELP - Cannot connect to server computer
    ... ICS will only work with two cards, a Network card connected to ... Next you say you can ping your server, is this by using the servers IP ...
    (microsoft.public.pocketpc.wireless)