Re: How to reset the DHCP server address
From: Paul C (pciarfella_at_watercove.com)
Date: 02/10/04
- Next message: Dave Field [MSFT]: "Re: How to Install certificate?"
- Previous message: DavidC: "Re: VPN Connection Timeout"
- In reply to: David Hettel MS MVP - Mobile Devices: "Re: How to reset the DHCP server address"
- Next in thread: Beverly Howard [Ms-MVP/MobileDev]: "Re: How to reset the DHCP server address"
- Messages sorted by: [ date ] [ thread ]
Date: Tue, 10 Feb 2004 14:29:24 -0500
Thanks for the pointer. There's a lot of vxXXX tools ... I wish there was
a vxMagicallyFixIt...
- Paul
"David Hettel MS MVP - Mobile Devices" <dhettel@fuse.net> wrote in message
news:eTC0F0$7DHA.1356@tk2msftngp13.phx.gbl...
> Paul it's not the wrong address it is the last used address that
vxIPConfig
> is showing, I will say that this makes it appear as if it is not releasing
> the DHCP address, but this is the last used address.
>
> If you download vxSniffer, and capture the connection sequence you can see
> this. My guess is that you might check to see if there is a newer version
of
> the DHCP Server for your work.
>
> --
> David Hettel
> Microsoft MVP Mobile Devices
>
> This posting is provided "as is" with no warranties, and confers no
rights.
> You assume all risks for your use.
>
> Handhelds, mobile: http://www.geekzone.co.nz
> Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449
>
> "Paul C" <pciarfella@watercove.com> wrote in message
> news:ept$Xj$7DHA.2432@TK2MSFTNGP10.phx.gbl...
> > vxIPConfig shows IPaddress = 0.0.0.0, default gway blank and the wrong
> DHCP
> > server address
> >
> > vxutil shows the last value for the default gateway (and DNS), as well
as
> > 0.0.0.0 for the IP address
> >
> > "David Hettel MS MVP - Mobile Devices" <dhettel@fuse.net> wrote in
message
> > news:#1seKr#7DHA.3028@TK2MSFTNGP09.phx.gbl...
> > > If you use vxIPConfig to release your network, does the IP address of
> > your
> > > iPAQ go to 0.0.0.0 and the Default Gateway show a blank value on
> release?
> > > The DHCP Server will normally show the last server connected to, as
well
> > as
> > > the last lease obtained.
> > >
> > > vxUtil will also normally show the last values obtain for Default
> Gateway
> > > as well. Only showing a 0.0.0.0 for the IP address to indicate the
> adapter
> > > is released.
> > >
> > > --
> > > David Hettel
> > > Microsoft MVP Mobile Devices
> > >
> > > This posting is provided "as is" with no warranties, and confers no
> > rights.
> > > You assume all risks for your use.
> > >
> > > Handhelds, mobile: http://www.geekzone.co.nz
> > > Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449
> > >
> > > "Paul C" <pciarfella@watercove.com> wrote in message
> > > news:%23O%23P4a%237DHA.1948@TK2MSFTNGP12.phx.gbl...
> > > > In my office network, vxutil reports my home DHCP server address.
> > > >
> > > > "Beverly Howard [Ms-MVP/MobileDev]" <BevNoSpamBevHoward.com> wrote
in
> > > > message news:uVnFmJ27DHA.2656@TK2MSFTNGP11.phx.gbl...
> > > > > would be interested in knowing what vxUtil reports for the
specific
> > > > > hardware entry
> > > > >
> > > > > Beverly Howard
> > > > >
> > > > > =============================================================
> > > > > Note; The contents of my postings and responses here represent my
> > > > > personal opinions and do not necessarily reflect the views,
thoughts
> > or
> > > > > feelings of Microsoft or any of its employees.
> > > > >
> > > > > I am not an employee of Microsoft. I visit and post here because
I
> > > > > (generally ;-) enjoy the experience and learn a lot by
participating
> > > here.
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
- Next message: Dave Field [MSFT]: "Re: How to Install certificate?"
- Previous message: DavidC: "Re: VPN Connection Timeout"
- In reply to: David Hettel MS MVP - Mobile Devices: "Re: How to reset the DHCP server address"
- Next in thread: Beverly Howard [Ms-MVP/MobileDev]: "Re: How to reset the DHCP server address"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|