Re: ROM Update failed

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

When the device is connected to the PC, ActiveSync does not make a connection and therefore the upgrade program will not run.
Have tried all the resets etc.
I have since sent the device back to Expansys for repair.
They are going to repair under warranty.
Thanks any way


Tungsten

"Helio Diamant - MS-MVP/Mobile Devices" <helio@xxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:#iOWrhXpJHA.1172@xxxxxxxxxxxxxxxxxxxxxxx
There is a possibility that putting the device in Bootloader mode will enable you to retry installing the upgrade:

- Press at the same time both Softkey buttons and soft reset the device while holding them. Hold the two buttons until the bootloader screen appears. Then try to run the upgrade.

If it doesn't help, try to hard-reset - to do this, soft reset while pressing Camera and Comm buttons (two buttons on the left and right at the bottom of the device) soft-reset device. When asked, press left soft-key (YES).

--
----
Helio Diamant
MS-MVP/Mobile Devices
Editor - PocketPCFreak.com



"Tungsten" <tungstenc@xxxxxxxxxxxx> wrote in message news:IKzsl.98974$Dz4.94997@xxxxxxxxxxxxxxxx
Hi, a ROM update on my MWG_Zinc II failed and now my device will not boot. I have tried resetting etc but still does not work. I there anything I can do to repair/reflash the device.


Tungsten


.

Relevant Pages

  • Re: IP address and LAN problems
    ... Winsock checks after I had reset. ... then able to connect to Tiscali, but the LAN connection is broken. ... years until the broadband network failed for a week over Xmas. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Dial-up clients drop connections
    ... Both products physically synchronize with the respondent modem, authenticate, attempt to "talk to the network", then drop the connection. ... Extreme cases may warrant the removal of the TCP/IP protocol..With the NetShell utility, you can reset the TCP/IP stack to restore it to its state that existed when the operating system was installed. ... When you run the reset command, it rewrites pertinent registry keys that are used by the Internet Protocol stack to reach the same result as the removal and the reinstallation of the protocol. ...
    (microsoft.public.windowsxp.general)
  • Re: no picture on LG dvd player
    ... I checked out his manual online and didn't see any instructions for a reset. ... It's connected via a yellow analog connection to my old Sony TV. ...
    (rec.video.dvd.players)
  • Re: problems after upgrade
    ... Deb http://http.us.debian.org/debian/ testing main contrib non-free ... gone through many $apt-get update upgrades. ... in the browser I get connection has timed out. ... the same before and after the upgrade. ...
    (Debian-User)
  • Re: sshd closes connection immediately after login
    ... on Interix. ... proceeds to close the connection. ... I have not fiddled with the sshd configuration files ... You did an OS upgrade. ...
    (comp.security.ssh)