Re: COM1 Serial for Hyperterminal

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

What are the settings on the device? As long as they match you should be
fine. Not sure if the port supports flow control - that's hardware
dependent. I'd try no control for now.

I can't find any "serial settings" for the device. Any idea where this would
be located?

Echo where? You have to have software on the PPC running that opens the
port and listens. ... The PPC doesn't do anything like that
automatically, just like your PC doesn't (you run Hyperterminal to do it).

PPC doesn't have a HyperTerminal style program, so I don't know where to
look to see if data is getting to the devices serial port.

Is it even called a serial port on the PPC? When I open the Connection
Settings, I see the following:
* Beam
* Bluetooth
* Connections
* CSD Line Type
* GPRS Settings
* Network Cards and
* WLAN

Before I can connect, I need to know what to use to connect to the PC with
on the device side.

What should I use, and how would it be set up?


.

Relevant Pages

  • Re: accessing consoles remotely via decserver
    ... >> i switched off remote modification, and i have done the following settings ... >> Autoconnect, Failover, Input Flow Control, Lock, Output Flow Control ... > Local> set port 2 output flow disabled ... > between the terminal server port and the console. ...
    (comp.os.vms)
  • Re: Cant Send e-mails - Outlook 2003
    ... Rich, the answer to #1 is yes, at home Outlook sends messages just fine. ... I asked them about other port numbers, and they say they do not have any ... Your original settings might have been okay, but Verizon may have had server ...
    (microsoft.public.outlook.installation)
  • Re: Desktop On-Call
    ... Also, if your port wasn't opened in a firewall, then I don't think you'd get the login prompt. ... I think the login Java applet does some initial communication with the DTOC server before it asks for your username and password. ... The notebook settings for this are found in the "Host PC Setting" tab. ...
    (comp.os.os2.apps)
  • Re: shared printer will not work?
    ... As for the printer port settings it is USB001 Virtual ... Right click the printer and select Sharing. ... To further set permissions click the Advanced button. ...
    (microsoft.public.windowsxp.general)
  • Re: thin client com ports
    ... The Topaz Driver creates an ini file that directs the settings. ... specific instructions on the COM port settings. ... I am testing several thin clients. ... The 1125 when connected to an RDP session shows not to have ...
    (microsoft.public.windows.terminal_services)