Re: WM6 Activesync with Exchange Server "Waiting for Network" problem
- From: "Chris De Herrera" <chris@xxxxxxxxxxxxxxxx>
- Date: Mon, 10 Sep 2007 21:44:40 -0700
"Brendan Helsham" <BrendanHelsham@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:543E0D57-4B2B-486F-AE24-4815CB8C6AF2@xxxxxxxxxxxxxxxx
Hello
I have a found a lot of posts on the Internet regarding this problem.
After
some exhaustive research and testing on my end, I feel as though I have
narrowed this down a little; unfortunately, I have not resolved the
problem
as yet.
I currently have the following hardware/software configuration
* HTC P3600i Phone (Dopod D810X)
* Windows Vista Business (on desktop & laptop) + WMDC for Vista
* Exchange Server 2003 SP2 (on Windows 2003 Server SP1) + latest hotfixes
* Cisco ASA5505 Firewall configured to allow SSL to Exchange Server
When connected to my desktop or laptop, the servername resolves to an
internal IP (192.168.8.1) and when connected OTA via my mobile carrier
(Telstra in Australia), the servername will resolve to the public IP
address
of 203.206.x.y etc.
I found a nice screenshot of the exact problem at
http://discussion.treocentral.com/showthread.php?t=136358 and I have the
following comments to add wrt my findings....
* If I reboot my phone with the USB cable connected, I can use USB but not
OTA sync until I reboot again
* If I reboot my phone and use OTA sync, I cannot use USB until I reboot
again
* I found some posts that indicate this to be a DNS Cache problem (sounded
promising as the mail server will resolve to a different IP via USB
compared
to OTA sync) but I tried making these registry changes on the Phone with
no
success. There seems to be a bit of confusion as to whether this key is
DnsCacheEnable or DNsCacheEnabled. There are references to this reg
change
at
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.pocketpc.activesync&tid=75360955-a232-4985-acb2-b55f30cfe23c&p=1
but I had no success with either setting.
* I have other clients that also have the same problem and they have a
range
of different phone hardware (eg: iMate SP5) and client software (Windows
XP),
so it does not seem to be specific to the phone or the PC, more
specifically
to Windows Mobile and Exchange Activesync.
Has anyone else got as far as this, or perhaps, further? I would expect
that this is fixable, but knowing what little tweak is needed has escaped
me
so far.
Thanks in advance
Cheers
-Brendan
.
- Prev by Date: Re: Unable to establish a connection between the PC and the device
- Next by Date: Re: WM6 Activesync with Exchange Server "Waiting for Network" problem
- Previous by thread: Recurring ActiveSync "can't find COM port" error
- Next by thread: Re: WM6 Activesync with Exchange Server "Waiting for Network" problem
- Index(es):
Relevant Pages
|
Loading
