recently installed this usb broadband modem and now activesync only
shows my HP iPaq 2750 as a guest mode. It's been working fine for the
last 3 years.... <sigh>
The only way to now sync my device, is to uninstal the modem, sync,
then reinstall the modem. not a good thing to do as i sync on a
regular basis....
Anybody else have such a problem or know of why this issue has arose?
Re: Difficulty recovering from DSL loss of sync ... When I lose my DSL connection | (loss of sync), the only way so far I've been able to regain my Internet ... power off the modem... (comp.os.linux.networking)
Re: ADSL connection woes ... I had a problem like this but found out it was the dsl modem losing sync.... > set log Phase Chat LCP IPCP CCP tun command... The information contained in this communication is confidential, private, ... (freebsd-questions)
Re: Modem Keeps Dropping Signal ... The Singal To Noise Ratio can go as low as 1, ... cable run along multiple AC power cables?... The RCA modem reading was -7.5, given the correction of the AGC, your Rx ... There are numerous reasons why the modem will lose sync with the ... (comp.dcom.modems.cable)
Re: ADSL drops line every night ... I waited for 10 days and nothing changed (I can make my modem very verbose so I can tell) so I had to cap my own down speed to 5120 where it will still train 6880 ish if I let it, as BT still offer 6db target margin. ... I guess an ADSL2 TI chipset would be a bit better as it seems that noise causes mine to loose it even if it's brief. ... For me on a residential exchange there was a very high correlation between evenings/weekends and number of drops - I guess alot of my neighbours don't sync 24/7, or there is just more noise about when everyone is home. ... (uk.comp.os.linux)