Re: WM5, Dell Axim, USB, and disabling TCP/IP?
- From: "Carl Wolz [MSFT]" <carlw@xxxxxxxxxxxxxxxxxxxx>
- Date: Tue, 14 Mar 2006 19:37:55 -0800
All of ActiveSync uses TCP. The difference is that for WM5.0 devices the PC
connection now shows up as a network interface. The protocol over the USB is
a RNDIS protocol, which is a much richer protocol (IPV6, UDP, etc). Prior
devices used PPP as the protocol over the serial USB cable.
In theory the device could be set-up to operate using the old PPP mode if
the device supports the proper drivers. (It's just code right?).
--
Carl Wolz [MSFT]
This Posting is provided "AS IS" with no warranties, and confers no rights.
<srehrlich@xxxxxxxxx> wrote in message
news:1142010430.990264.261420@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
My goal is to have the Axim bypass the firewall and be properly seen by
XP and sync. The software firewall is required and cannot be removed.
A colleague has an older Axim (about a year) which uses straight USB
and syncs fine. Disabling TCP over USB on this newer Axim would be
ideal. The firewall is not user-configurable.
Thanks.
Scott
.
- References:
- WM5, Dell Axim, USB, and disabling TCP/IP?
- From: srehrlich
- Re: WM5, Dell Axim, USB, and disabling TCP/IP?
- From: Paul G. Tobey [eMVP]
- Re: WM5, Dell Axim, USB, and disabling TCP/IP?
- From: srehrlich@xxxxxxxxx
- WM5, Dell Axim, USB, and disabling TCP/IP?
- Prev by Date: Re: Only get Guest Connection
- Next by Date: Re: WM5, Dell Axim, USB, and disabling TCP/IP?
- Previous by thread: Re: WM5, Dell Axim, USB, and disabling TCP/IP?
- Next by thread: Re: WM5, Dell Axim, USB, and disabling TCP/IP?
- Index(es):
Relevant Pages
|
