Re: Can't synch Verizon/UTSTarcom/Audiovox 6700 after 1rst attempt
- From: "Carl Wolz [MSFT]" <carlw@xxxxxxxxxxxxxxxxxxxx>
- Date: Tue, 28 Feb 2006 14:28:33 -0800
No, we just need TCP
--
Carl Wolz [MSFT]
This Posting is provided "AS IS" with no warranties, and confers no rights.
"Barbara Henninger" <barbara.henninger@xxxxxxxxxxx> wrote in message
news:uYvcylGPGHA.1696@xxxxxxxxxxxxxxxxxxxxxxx
Great, now do i have to turn any of the other options on, client for
microsoft networks ...?
I did vpn into my work on the ppc. I'll keep an eye on it turning this
off.
Thanks Carl.
Barb
"Carl Wolz [MSFT]" <carlw@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:eV0ODLBPGHA.3100@xxxxxxxxxxxxxxxxxxxxxxx
Yes, I would believe it. I was going to tell you in your previous post,
but you managed to turn it back on.
Normally the IP is selected by default. There is an application your work
PC who is turning it off. Perhaps a VPN client.
--
Carl Wolz [MSFT]
This Posting is provided "AS IS" with no warranties, and confers no
rights.
"Barbara Henninger" <barbara.henninger@xxxxxxxxxxx> wrote in message
news:eCKbAE%23OGHA.1192@xxxxxxxxxxxxxxxxxxxxxxx
What would you say if I told you it worked by:
- going to Network connections/Local Area Connection (17) ( the mobile
device )
- clicked properties and turned on ip
It seems to work. I've unplugged the device and plugged it back in and
it
syncs!
I can also now ping 169.254.2.2.
I didn't have to turn on ip at home. Is this something that is
generally
done automatically when plugging the device in?
Woo hoo!
Barb
"Carl Wolz [MSFT]" <carlw@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:u1NlM9xOGHA.2828@xxxxxxxxxxxxxxxxxxxxxxx
Super, now let's take a look at your work PC.in
There are essentiality three layers
a.. Driver
b.. Network (TCP)
c.. Application.
The first one is the familiar one. When you plug in a PnP USB device
you
hear the familiar doo-ding noise. If there is an error, you get a
dialog
the task bar or an exclamation in the device manager. If you are notgetting
any errors at this part, let's proceed to the next layer.with
Once the drivers are loaded a new network interface now appears.
Inside a command window, type "ipconfig". It will reveal a network card
an IP address of 169.254.2.2. Now the device should be reachable. Type"ping
169.254.2.1", the device should respond with "Reply from 169.254.2.1:went
bytes=32 time=2ms TTL=128".
If you can't get this far, we will then take a look at what could have
wrong.rights.
--
Carl Wolz [MSFT]
This Posting is provided "AS IS" with no warranties, and confers no
are
"Barbara Henninger" <barbara.henninger@xxxxxxxxxxx> wrote in message
news:%23IfLCVxOGHA.2888@xxxxxxxxxxxxxxxxxxxxxxx
from a thread above...
I shut off the ms windows firewall. I see no other applications that
toon
my computer running a firewall. Is there a way I can look for
firewalls
that may be on a work server? This could just be my ignorance of
where
aslook.
Here is some good news. I have successfully albeit at 4am loaded
activesync
4.1 on my dell pc at home and it works!!!
Interesting note, the activesync 4.1 on my pc at work looks very
different.
What I mean is the only menu option that I could change other than
Help
was
File/Connection Settings. I couldn't access anything under Tools at
all
for
example. With the work pc, I loaded activesync 4.0 with the Verizon
cd
anwell as MS outlook 2002 I believe. I'm not sure why the cd had
outlook
2002.
It worked once, so I then went to the ms website and did as suggested
upgrading to 4.1. I have uninstalled on the work pc, deleted the
remaining
activesync directory and re-installed. Started with 4.1 directly.
Does
the
activesync menu only become fully accessible when connected? Is
there
Ieasy way to search for firewalls that might be running on my system?
I
don't see any of the particular firewalls mentioned on the ms
website.
atdid shut off the ms system firewall.
Thanks for the help. I'm at least delighted it is working on my
laptop
Pardonhome. BTW, the Windows Firewall is on at home.
Barb
"Carl Wolz [MSFT]" <carlw@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:u2Dfy$mOGHA.1132@xxxxxxxxxxxxxxxxxxxxxxx
Does the ActiveSync work for anyone on a Verizon or Sprint 6700
phone
with mobile 5.0?
I have a GSM version, which works.
Does the Palm Treo700 work with Activesync?
My Treo700 also works.
Do you experience the same behavior if you connect the device
directly
into the laptop as compared to the docking station?
Is there a Powered USB hub handy? Some laptops USB ports don't have
enough power for these devices. Try plugging in the HUB into the
laptop
and the device in to the hub.
--
Carl Wolz [MSFT]
This Posting is provided "AS IS" with no warranties, and confers no
rights.
"Barbara Henninger" <barbara.henninger@xxxxxxxxxxx> wrote in message
news:%23ftf79LOGHA.208@xxxxxxxxxxxxxxxxxxxxxxx
Again, I have uninstalled activesync, reboot, re-installed
activesync
4.1 -
reboot and plugged in.
Nothing.
Does the ActiveSync work for anyone on a Verizon or Sprint 6700
phone
with
mobile 5.0?
Verizon CD comes with Microsoft Office 2002. I don't see that in
the
readme
file as supported with Activesynch 4.1. Could that be the issue?
Does the Palm Treo700 work with Activesync?
Does Chapura write software for mobile 5.0 to sync with outlook?
plugthe
question to this group but I'm running out of options.
Anything else to check? Registry entries? log files? processes5.1.2600.2781
running?
"Carl Wolz [MSFT]" <carlw@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:O2lQ8$BOGHA.3272@xxxxxxxxxxxxxxxxxxxxxxx
Check to see that "DHCP Client" is running ControlYes.
Panel->Administrative
Tools->Services. Check that the allow USB is checked on both the
PC
and
device.
Allow USB is on PC.
When cradled use 'USB on mobile pc.
Probably unrelated but, I'm seeing drivers for ActiveSync as
in(xpsp.051020-1729). You may have to uninstall ActiveSync,re-install
reboot,
ActiveSync 4.1 and reboot again, before plugging in your device.Don't you think that refers to just the driver? This was from the
network
adapter driver details when the device is cradled.
The Active sync Version on the pc is 4.1.0 ( Build 4841)
I have unstalled ActiveSync, rebooted, and rebooted again before
plugging
the device. This is when I get the usb mobile device found in the
Resetand
play icon. I will try again to make sure that I had the correctshows
sequence.
Is it possible a process is no longer running that I can check?
Wcescomm.exe is what sees that the device is plugged in. It
usually
up
as the gray icon in the taskbar.It is there.
Doesn't the log below tell anythiing? What about the Connection
messagebyIgnored
Peer, killed thread...This was the first and only time it worked.
02/13/2006 13:19:55.879 p(2728) t(4016) WCESMgr ->
CeSyncStart -
seconds!!!because already syncing - DataSource.cpp(4686)
02/13/2006 13:22:17.296 Synchronizing 6 items
02/13/2006 13:46:46.673 [Ctrl Recv] [0x598]: Connection reset
by
peer
(WSAECONNRESET : OK on disconnect)
02/13/2006 13:46:51.900 Failed to close '505DA' window on time
02/13/2006 13:46:56.857 ERROR: Killed thread Receive after 10
rights.
--
Carl Wolz [MSFT]
This Posting is provided "AS IS" with no warranties, and confers
no
"Barbara Henninger" <barbara.henninger@xxxxxxxxxxx> wrote in
thenews:eyMMez7NGHA.1676@xxxxxxxxxxxxxxxxxxxxxxxto
Follow-up below...thanks for the help. I've xxxx-ed out my
src &
dest
addresses for no real reason other than public display. I'll
be
happy
e-mail those to you individually if you'd like. Also note
that
up,first
recommendedlog stamp is with activesync 4.0. Today is activesync 4.1 as
by
ms faq when it didn't sync.
Barb
"Carl Wolz [MSFT]" <carlw@xxxxxxxxxxxxxxxxxxxx> wrote in
message
news:%23WTdoT0NGHA.2036@xxxxxxxxxxxxxxxxxxxxxxx
How did you determine that the PC detected you device?? TheI saw the hardware detected/found icon in the right corner
PnP
sound
(doo-ding)?
come
usb8023x.systhen
Iit
thebelieve mobile pc recognized. It doesn't happen often so I
didn't
get
specific text. I think if I unstall the usb and reinstall I
can
see
again if you'd like.
Does a Windows mobile device appear in the Network adapters?Yes. It shows Windows Mobile-based Device #10
Details:
Driver Files c:\WINDOWS\System32\DRIVERS\mdismpx.sys &
CommunicationFile Version: 5.1.2600.1764 (xpsp 2.051020-1603)
Do you see "02/21/2006 16:10:22.692 - USB RNDIS: DeviceNo. I see the below. I unplugged the usb and plugged it back
Arrival
notification" in your wcescomm.log file in the %TEMP% dir?
in
and
didn't
see anything this morning.
02/21/2006 12:25:00.304 - Windows CE Services (4.1.0)
[7connection.Logging.
02/21/2006 12:25:00.454 - IrUtil: IrDA socket cannot be
created,
error
code
10093.
02/21/2006 12:25:00.665 - Windows CE Services Communication
started.
02/21/2006 12:25:08.885 - Started desktop passthru TCP2UDP
component
02/21/2006 12:25:08.885 - Connection: Prep for a new socket
xxxxx:8080****************02/21/2006 12:25:09.006 - ComSerial: Open device <COM1>.
02/21/2006 12:25:09.869 - Serial: Starting device detection at
19200.
02/21/2006 12:25:09.869 - ComSerial: Change DTR to 1.
02/21/2006 16:03:07.385 - Serial: Starting device detection at
19200.
02/21/2006 16:03:07.385 - ComSerial: Change DTR to 1.
02/21/2006 16:58:13.522 - Desktop Locked.
02/21/2006 16:58:13.542 - ComSerial: Closed
device..................
02/22/2006 08:41:42.286 - Desktop unlocked.
02/22/2006 08:41:42.666 - ComSerial: Open device <COM1>.
02/22/2006 08:41:42.666 - Serial: Starting device detection at
19200.
02/22/2006 08:41:42.666 - ComSerial: Change DTR to 1.
In WCESMgr.log
The one time it worked was 2/13/06
**** ActiveSync (4.0.4358 RETAIL) started, Cmd line:
'/GetConnected'
02/13/2006 13:16:28.154 ERROR returned in function
CMainFrmWnd::ReadWindowPlacement. hr: 0x80070002
02/13/2006 13:18:11.594 **************** Logging Started
****************02/13/2006 13:18:11.594 Process D:\Software\Microsoft
ActiveSync\WCESMgr.exe
p(2092)
02/13/2006 13:18:11.594 ActiveSync second instance started,
Cmd
line:
'/onconnect'
02/13/2006 13:18:11.594 ActiveSync second instance exiting
02/13/2006 13:18:11.594 **************** Logging Stopped
02/13/2006 13:18:12.986 Creating new partnership for device
0x0
(Pocket_PC,
PocketPC).
02/13/2006 13:18:18.083 p(2728) t(2884) TraceToFile -> ERROR
in
CCSP::ParseNodes : hr = 0x80140507 - Devicecm.cpp(1584)
02/13/2006 13:18:18.083 Found PIM at
'C:\PROGRA~1\MICROS~2\Office10\OUTLOOK.EXE'
02/13/2006 13:18:18.083 Found PIM at
'C:\PROGRA~1\MICROS~2\Office10\OUTLOOK.EXE'
02/13/2006 13:18:18.083 p(2728) t(1800) TraceToFile -> ERROR
in
CUserInfo::GetUserSettings : hr = 0x8007054b -
userinfo.cpp(414)
02/13/2006 13:19:06.711 DTPT: Setting DTPT network to {src}
02/13/2006 13:19:06.711 DTPT: Incomming proxy server string:
Src={xxx}
02/13/2006 13:19:06.711 DTPT: Setup proxy to send to server.
Result=0x00000000Dest={xxxx} Proxy=xxx Socks=xxxx:1080 HR=0x00000000
02/13/2006 13:19:06.711 DTPT: Send DTPT Network={src}.
02/13/2006 13:19:08.524 *** Http listener loaded
02/13/2006 13:19:08.524 Connected to device 0x13180574
(PocketPC,
WM_bhenning) [partner 0]
02/13/2006 13:19:08.524 **** Starting synchronization engine
02/13/2006 13:19:09.986 Remote object: 'Ink', SSPId:
0x00002710
modifys,items][26
02/13/2006 13:19:09.986 Remote object: 'Favorite', SSPId:
0x00002711
isitems]
02/13/2006 13:19:09.986 Remote object: 'Media', SSPId:
0x00002712
[1
items]
02/13/2006 13:19:09.986 Remote object: 'File', SSPId:
0x00002713
[53
items]
02/13/2006 13:19:09.986 WARNING: Object type 'Mobile
Application
Link'
not installed on the device
02/13/2006 13:19:29.563 Scanning desktop SSP for 'Ink'
02/13/2006 13:19:44.093 Done scanning 'Ink' [84 creates, 0
MC_NEW_DESKTOPchanges,0
deletes]
02/13/2006 13:19:44.093 Start remote log processing for 'Ink':
[6
6
items]
02/13/2006 13:19:44.093 Done remote log processing for 'Ink'
02/13/2006 13:19:44.093 Lost global mapping, uCode:
Ignored02/13/2006 13:19:55.879 Combine is chosen for Ink
02/13/2006 13:19:55.879 **** Synchronization engine started
02/13/2006 13:19:55.879 p(2728) t(4016) WCESMgr ->
CeSyncStart -
seconds!!!because already syncing - DataSource.cpp(4686)
02/13/2006 13:22:17.296 Synchronizing 6 items
02/13/2006 13:46:46.673 [Ctrl Recv] [0x598]: Connection reset
by
peer
(WSAECONNRESET : OK on disconnect)
02/13/2006 13:46:51.900 Failed to close '505DA' window on time
02/13/2006 13:46:56.857 ERROR: Killed thread Receive after 10
****************
02/13/2006 15:55:41.081 **************** Logging Started
******************** ActiveSync (4.1.4841 RETAIL) started, Cmd line: ''
02/21/2006 11:46:22.018 **** ActiveSync exiting
02/21/2006 11:46:22.018 **************** Logging Stopped
What is the make and model of laptop?IBM ThinkPad IBM Model:R50-1831CU3
--Is it possible a process is no longer running that I can
check?
Carl Wolz [MSFT]rights.
This Posting is provided "AS IS" with no warranties, and
confers
no
.
- Follow-Ups:
- Re: Can't synch Verizon/UTSTarcom/Audiovox 6700 after 1rst attempt
- From: Barbara Henninger
- Re: Can't synch Verizon/UTSTarcom/Audiovox 6700 after 1rst attempt
- Prev by Date: Re: Lotus Notes and Microsoft Outlook Connector
- Next by Date: Re: Wireless Sync Issue
- Previous by thread: Re: Lotus Notes and Microsoft Outlook Connector
- Next by thread: Re: Can't synch Verizon/UTSTarcom/Audiovox 6700 after 1rst attempt
- Index(es):
Relevant Pages
|
