Re: Posting to the activesync group...can't synch Audiovox 6700 after 1rst attempt

I too am getting close to returning this phone. My main purpose of this
phone was to have my palm ( calendar sync ) and phone together. This phone
had wifi which was a bonus. Anywho, I'll keep trying until my 30 day return
is up...Barb

Anything else to check? Registry entries? log files? processes running?

"Carl Wolz [MSFT]" <carlw@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:O2lQ8$BOGHA.3272@xxxxxxxxxxxxxxxxxxxxxxx
Check to see that "DHCP Client" is running Control Panel->Administrative
Tools->Services. Check that the allow USB is checked on both the PC and
device.

Yes.
Allow USB is on PC.
When cradled use 'USB on mobile pc.



Probably unrelated but, I'm seeing drivers for ActiveSync as 5.1.2600.2781
(xpsp.051020-1729). You may have to uninstall ActiveSync, reboot,
re-install
ActiveSync 4.1 and reboot again, before plugging in your device.


Don't you think that refers to just the driver? This was from the network
adapter driver details when the device is cradled.
The Active sync Version on the pc is 4.1.0 ( Build 4841)

I have unstalled ActiveSync, rebooted, and rebooted again before plugging in
the device. This is when I get the usb mobile device found in the plug and
play icon. I will try again to make sure that I had the correct sequence.

Is it possible a process is no longer running that I can check?

Wcescomm.exe is what sees that the device is plugged in. It usually shows
up
as the gray icon in the taskbar.
It is there.

Doesn't the log below tell anythiing? What about the Connection Reset by
Peer, killed thread...This was the first and only time it worked.
02/13/2006 13:19:55.879 p(2728) t(4016) WCESMgr -> CeSyncStart - Ignored
because already syncing - DataSource.cpp(4686)
02/13/2006 13:22:17.296 Synchronizing 6 items
02/13/2006 13:46:46.673 [Ctrl Recv] [0x598]: Connection reset by peer
(WSAECONNRESET : OK on disconnect)
02/13/2006 13:46:51.900 Failed to close '505DA' window on time
02/13/2006 13:46:56.857 ERROR: Killed thread Receive after 10 seconds!!!

--
Carl Wolz [MSFT]
This Posting is provided "AS IS" with no warranties, and confers no
rights.


"Barbara Henninger" <barbara.henninger@xxxxxxxxxxx> wrote in message
news:eyMMez7NGHA.1676@xxxxxxxxxxxxxxxxxxxxxxx
Follow-up below...thanks for the help. I've xxxx-ed out my src & dest
addresses for no real reason other than public display. I'll be happy
to
e-mail those to you individually if you'd like. Also note that the
first
log stamp is with activesync 4.0. Today is activesync 4.1 as
recommended
by
ms faq when it didn't sync.
Barb

"Carl Wolz [MSFT]" <carlw@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:%23WTdoT0NGHA.2036@xxxxxxxxxxxxxxxxxxxxxxx
How did you determine that the PC detected you device?? The PnP sound
(doo-ding)?
I saw the hardware detected/found icon in the right corner come up, then
I
believe mobile pc recognized. It doesn't happen often so I didn't get
the
specific text. I think if I unstall the usb and reinstall I can see it
again if you'd like.

Does a Windows mobile device appear in the Network adapters?

Yes. It shows Windows Mobile-based Device #10
Details:
Driver Files c:\WINDOWS\System32\DRIVERS\mdismpx.sys & usb8023x.sys
File Version: 5.1.2600.1764 (xpsp 2.051020-1603)

Do you see "02/21/2006 16:10:22.692 - USB RNDIS: Device Arrival
notification" in your wcescomm.log file in the %TEMP% dir?

No. I see the below. I unplugged the usb and plugged it back in and
didn't
see anything this morning.
02/21/2006 12:25:00.304 - Windows CE Services (4.1.0) Communication
Logging.
02/21/2006 12:25:00.454 - IrUtil: IrDA socket cannot be created, error
code
10093.
02/21/2006 12:25:00.665 - Windows CE Services Communication started.
02/21/2006 12:25:08.885 - Started desktop passthru TCP2UDP component
02/21/2006 12:25:08.885 - Connection: Prep for a new socket connection.
02/21/2006 12:25:09.006 - ComSerial: Open device <COM1>.
02/21/2006 12:25:09.869 - Serial: Starting device detection at 19200.
02/21/2006 12:25:09.869 - ComSerial: Change DTR to 1.
02/21/2006 16:03:07.385 - Serial: Starting device detection at 19200.
02/21/2006 16:03:07.385 - ComSerial: Change DTR to 1.
02/21/2006 16:58:13.522 - Desktop Locked.
02/21/2006 16:58:13.542 - ComSerial: Closed device..................
02/22/2006 08:41:42.286 - Desktop unlocked.
02/22/2006 08:41:42.666 - ComSerial: Open device <COM1>.
02/22/2006 08:41:42.666 - Serial: Starting device detection at 19200.
02/22/2006 08:41:42.666 - ComSerial: Change DTR to 1.

In WCESMgr.log
The one time it worked was 2/13/06
**** ActiveSync (4.0.4358 RETAIL) started, Cmd line: '/GetConnected'
02/13/2006 13:16:28.154 ERROR returned in function
CMainFrmWnd::ReadWindowPlacement. hr: 0x80070002
02/13/2006 13:18:11.594 **************** Logging Started
****************
02/13/2006 13:18:11.594 Process D:\Software\Microsoft
ActiveSync\WCESMgr.exe
p(2092)
02/13/2006 13:18:11.594 ActiveSync second instance started, Cmd line:
'/onconnect'
02/13/2006 13:18:11.594 ActiveSync second instance exiting
02/13/2006 13:18:11.594 **************** Logging Stopped
****************
02/13/2006 13:18:12.986 Creating new partnership for device 0x0
(Pocket_PC,
PocketPC).
02/13/2006 13:18:18.083 p(2728) t(2884) TraceToFile -> ERROR in
CCSP::ParseNodes : hr = 0x80140507 - Devicecm.cpp(1584)
02/13/2006 13:18:18.083 Found PIM at
'C:\PROGRA~1\MICROS~2\Office10\OUTLOOK.EXE'
02/13/2006 13:18:18.083 Found PIM at
'C:\PROGRA~1\MICROS~2\Office10\OUTLOOK.EXE'
02/13/2006 13:18:18.083 p(2728) t(1800) TraceToFile -> ERROR in
CUserInfo::GetUserSettings : hr = 0x8007054b - userinfo.cpp(414)
02/13/2006 13:19:06.711 DTPT: Setting DTPT network to {src}
02/13/2006 13:19:06.711 DTPT: Incomming proxy server string: xxxxx:8080

02/13/2006 13:19:06.711 DTPT: Setup proxy to send to server. Src={xxx}
Dest={xxxx} Proxy=xxx Socks=xxxx:1080 HR=0x00000000
02/13/2006 13:19:06.711 DTPT: Send DTPT Network={src}.
Result=0x00000000
02/13/2006 13:19:08.524 *** Http listener loaded
02/13/2006 13:19:08.524 Connected to device 0x13180574 (PocketPC,
WM_bhenning) [partner 0]
02/13/2006 13:19:08.524 **** Starting synchronization engine
02/13/2006 13:19:09.986 Remote object: 'Ink', SSPId: 0x00002710 [7
items]
02/13/2006 13:19:09.986 Remote object: 'Favorite', SSPId: 0x00002711 [26
items]
02/13/2006 13:19:09.986 Remote object: 'Media', SSPId: 0x00002712 [1
items]
02/13/2006 13:19:09.986 Remote object: 'File', SSPId: 0x00002713 [53
items]
02/13/2006 13:19:09.986 WARNING: Object type 'Mobile Application Link'
is
not installed on the device
02/13/2006 13:19:29.563 Scanning desktop SSP for 'Ink'
02/13/2006 13:19:44.093 Done scanning 'Ink' [84 creates, 0 modifys, 0
deletes]
02/13/2006 13:19:44.093 Start remote log processing for 'Ink': [6
changes,
6
items]
02/13/2006 13:19:44.093 Done remote log processing for 'Ink'
02/13/2006 13:19:44.093 Lost global mapping, uCode: MC_NEW_DESKTOP
02/13/2006 13:19:55.879 Combine is chosen for Ink
02/13/2006 13:19:55.879 **** Synchronization engine started
02/13/2006 13:19:55.879 p(2728) t(4016) WCESMgr -> CeSyncStart - Ignored
because already syncing - DataSource.cpp(4686)
02/13/2006 13:22:17.296 Synchronizing 6 items
02/13/2006 13:46:46.673 [Ctrl Recv] [0x598]: Connection reset by peer
(WSAECONNRESET : OK on disconnect)
02/13/2006 13:46:51.900 Failed to close '505DA' window on time
02/13/2006 13:46:56.857 ERROR: Killed thread Receive after 10 seconds!!!

02/13/2006 15:55:41.081 **************** Logging Started
****************
**** ActiveSync (4.1.4841 RETAIL) started, Cmd line: ''
02/21/2006 11:46:22.018 **** ActiveSync exiting
02/21/2006 11:46:22.018 **************** Logging Stopped
****************

What is the make and model of laptop?
IBM ThinkPad IBM Model:R50-1831CU3
--
Is it possible a process is no longer running that I can check?

Carl Wolz [MSFT]
This Posting is provided "AS IS" with no warranties, and confers no
rights.







.

Relevant Pages

  • Re: Cant synch Verizon/UTSTarcom/Audiovox 6700 after 1rst attempt
    ... Let's stick with the driver first...Device Mgr 1.0 ... activesync, I see the mobile pc plug&play pop-up. ... In Network Connections, I see Windows Mobile-based Device, no firewall, no ... Under USB controllers, ...
    (microsoft.public.pocketpc.activesync)
  • Re: Cant synch Verizon/UTSTarcom/Audiovox 6700 after 1rst attempt
    ... ActiveSync - 4.1 ... Let's stick with the driver first...Device Mgr 1.0 ... Intel82801DB/DBM USB Universal Host Controller - 24C2 ... I see it under Network Adapter. ...
    (microsoft.public.pocketpc.activesync)
  • Re: Cant synch Verizon/UTSTarcom/Audiovox 6700 after 1rst attempt
    ... Activesync 4.1, turning off the Windows firewall and my Norton ... Is there a Powered USB hub handy? ... Does Chapura write software for mobile 5.0 to sync with outlook? ... Don't you think that refers to just the driver? ...
    (microsoft.public.pocketpc.activesync)
  • Re: Active Sync 4.2 suddenly wont connect to Axim X51v
    ... Settings | Connections, selecting USB to PC, deselecting... ... He had called Dell ... I can still sync via Bluetooth. ... firewall installed which blocks one or more of the ports that ActiveSync ...
    (microsoft.public.pocketpc.activesync)
  • Re: Activesync 4.1 - WM 5.0 WORKING
    ... The same USB dockstation worked OK in a Notebook where I used ... With the other computer the sync works once every 25 tries... ... When I see so many people with problems with Activesync 4.X and ... 04.cap - ActiveSync does Connecting-Connected-Looking for changes and 20 ...
    (microsoft.public.pocketpc.activesync)