Re: WM 5.0 and ActiveSync 3.8?
- From: "Chris De Herrera" <spam@xxxxxxxxxxxxxxxx>
- Date: Sun, 29 Jan 2006 09:50:35 -0800
Hi,
Here's some answers to your questions:
1. Microsoft removed the ability to sync via Wi-Fi due to security
concerns.
2. With a VPN the network administrator can decide whether or not to allow
you to connect another network while you are connected to the office. This
is called split horizons or dual homed. At this time only your network
administrator can resolve this because the setting is based on their
requirements for the VPN connection.
3. I do not know why it would not be seen each time you insert it in the
cradle. I would first suspect that the cradle is not making good contact
with the Axim and go from there.
--
Chris De Herrera
http://www.pocketpcfaq.com
http://www.tabletpctalk.com
http://www.pocketpctalk.com
http://www.mobilitytalk.com
ActiveSync 4.x Troubleshooting Guide -
http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x.htm
"Trehouse" <trehouse@xxxxxxxxxx> wrote in message
news:utAT%23PPJGHA.1728@xxxxxxxxxxxxxxxxxxxxxxx
> Hi, thanks for the response. I just got a UT Starcomm XV6700 for Verizon
> which uses WM5.0. I currently also use a Dell X30 WM2003 SE2 device. Both
> have WiFi and now since upgrading to AS 4.1 (4.0 which comes with the
> device didn't sync for me at all and which Audiovox says flat out doesn't
> work with the XV6700)
> 1) I can no longer sync over WiFi
>
> 2) Now, when connected to my office VPN and using Activsync if I take
> my device out of the cradle or put it in I am disconnected (saying routing
> table cannot be changed....). This is a big pain as I'm connected full
> time to VPN during the day.
>
> 3) Occassionally when putting device into cradle it's not seen.
>
> I'm sure there's more issues I'm not thinking of now which I never had
> before upgrading (lol) to AS 4.1.
>
> Thanks!
> "Raj Pillai" <YouMeAndTheMail@xxxxxxxxxxxx> wrote in message
> news:eaBq$$LJGHA.648@xxxxxxxxxxxxxxxxxxxxxxx
>> Hi,
>>
>> If you are going to sync the WM 5.0 device then you will need to use
>> ActiveSync 4.1. What is the nature of the issue that you are facing with
>> ActiveSync 4.1? Maybe someone will be able to help solve that.
>>
>> --
>> Regards,
>> Raj Pillai
>> Microsoft MVP - Mobile Devices
>> http://www.pocketpcfaq.com/raj
>>
>>
>> "Trehouse" <trehouse@xxxxxxxxxx> wrote in message
>> news:OTdoDBDJGHA.2912@xxxxxxxxxxxxxxxxxxxxxxx
>>> Can I downgrade from AS 4.1 (real garbage) to AS 3.8? I'm syncing a
>>> UTSmartcomm XV6700 w/ WM 5 and a Dell PDA WM 2003 SE2. I upgraded to WM
>>> 5.0 when I received the new phone pda thingy.
>>>
>>>
>>>
>>>
>>
>>
>>
>
>
.
- References:
- WM 5.0 and ActiveSync 3.8?
- From: Trehouse
- Re: WM 5.0 and ActiveSync 3.8?
- From: Raj Pillai
- Re: WM 5.0 and ActiveSync 3.8?
- From: Trehouse
- WM 5.0 and ActiveSync 3.8?
- Prev by Date: Re: Manual Sync
- Next by Date: Re: ActiveSync 4.1 WM5 iPAQ USB problems
- Previous by thread: Re: WM 5.0 and ActiveSync 3.8?
- Next by thread: Re: Connot synchronize [unknown]. Support Code:8600010b
- Index(es):
Relevant Pages
|
