Re: Can't create a "partnership" with my pocket pc

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Raj, I am running AS ver 3.8 and have deleted the dll files that were
installed when I tried AS4.1. Also I am running Zone Labs free version of
their firewall program, and have the firewall in XP running too. When I try
to sync, I turn off the Zone Labs firewall. I have gone in to the program
control for both firewall programs and set up for the AS program. I also
have a HP 1910 that I have had for 2.5 yrs. I went in and deleted the
partnership before I tried to sync with the xv6600. After becoming quite
frustated I tried AS 4.1 and later found out through this news group that it
was not a viable alternative for WinCE 2003 OS. So I have removed AS 4.1 and
re-installed AS 3.8 . Tuesday 1/17 I established a partnership with my HP
1910, but no partnership with the xv6600. I thought that it might be the
cradle, and had another one sent to me. It (AS) is still not creating a
partnership through the new cradle. I have tried numerous times by going in
to device mgr and removing the device and restarting windows as was
suggested by Rob Borek (see post dated 1/03).

Thanks, Noel
_____________________________________________________________________________________________________________________
"Raj Pillai" <YouMeAndTheMail@xxxxxxxxxxxx> wrote in message
news:ussopQQHGHA.1452@xxxxxxxxxxxxxxxxxxxxxxx
> Hi,
>
> Which version of ActiveSync are you using? Can you confirm whether you
> are using any firewall software?
>
> --
> Regards,
> Raj Pillai
> Microsoft MVP - Mobile Devices
> http://www.pocketpcfaq.com/raj
>
>
> "Herk" <hverheul@xxxxxxxxxxxxxx> wrote in message
> news:%23rxJSx6GGHA.1452@xxxxxxxxxxxxxxxxxxxxxxx
>>I have an audiovox xv6600 and cannot cync either. it will connect and the
>>green icon shows on the task bar but nothing happens. When I rightclick
>>on the icon and select "Explore" I get the following message in a dialog
>>box entitled "Failed to Start Remote Server"; Critical communications
>>services have failed to start. Try resetting the mobile device and then
>>reconnect again." I reset and reconnected but have the same problem.
>>
>> "Raj Pillai" <YouMeAndTheMail@xxxxxxxxxxxx> wrote in message
>> news:e5R5XgqGGHA.2632@xxxxxxxxxxxxxxxxxxxxxxx
>>> Peter,
>>>
>>> Are you using any firewall software? These tend to block the ports
>>> required for a successful sync.
>>>
>>> --
>>> Regards,
>>> Raj Pillai
>>> Microsoft MVP - Mobile Devices
>>> http://www.pocketpcfaq.com/raj
>>>
>>>
>>> "PETER BUTTIGLIERI" <cornwallonhudson@xxxxxxxxxxx> wrote in message
>>> news:e7rQsDgGGHA.3036@xxxxxxxxxxxxxxxxxxxxxxx
>>>> Using Windows XP and it is updated.
>>>>
>>>> Janice Fuller
>>>> ekdewine@xxxxxxx
>>>> "Lance Gardner" <Lgardner@xxxxxxxxxxxxxxxx> wrote in message
>>>> news:%23NJHXxjFGHA.376@xxxxxxxxxxxxxxxxxxxxxxx
>>>>> Can't get Activesync 3.8 to open so I can create a Partnership.
>>>>> Activesync wasn't connecting to my Pocket PC. So I un-installed
>>>>> activesync, removed the folder off the desktop. Re-installed
>>>>> Activesync 3.8 plugged in the USB cable and cradle. Green icon on
>>>>> desktop tray says "connected", but nothing happens when I try and open
>>>>> the application
>>>>>
>>>>> Lance
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>


.

Quantcast