Re: Can't create a "partnership" with my pocket pc

Herk, I have been having the same problem with my Verizon xv6600 also, as
you can see by my continueing thread of messages that I started on 01/03/06.
I am hoping that we can get to the "root" of our problem. Noel
_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_**_*_**_*_*_*_*_**_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*__*_*
Rob, I went in and deleted the device, windows asked to re-start, did so.
When the computer starts up and the device is in the cradle, it reconizes
the USB device and says it has installed the new hardware and is ready to
use. MS AS does not start and no partnership is made. When I start AS
manually from the programs menu it does not automatically find my device,
and when I have it search for the device, it says USB available but does not
connect. Any more ideas on this?
"Rob Borek [MS MVP]" <rborek@xxxxxxxxx> wrote in message
news:rffjs1tah59i2cn6elb9rtq32oeqe1f9ai@xxxxxxxxxx
> On Sat, 14 Jan 2006 18:58:54 GMT, "Noel Broenneke"
> <noelori@xxxxxxxxxxx> wrote:
>
>>Rob, here it is the 14th of Jan. and I still have not resolved my problem.
>>Like a fool I had also tried AS 4.1 and it still did not work. I have
>>followed other conversations and and went to Microsoft AS help and other
>>web
>>sites to remove AS 4.1 and re-install AS 3.8 . The program is still acting
>>the same, the computer recognizes the device and USB connection, AS
>>"sounds" docking & undocking. I have tried a soft reset of the device and
>>restart of Windows, but it still will not syncronize.I have also turned
>>off
>>my firewall application, and turned on the Win Xp firewall checking the
>>allowed programs for AS . I have gone and registered at Clintons' Website
>>to post this message also.
>
> Try going into Device Manager (Control Panel -> System, Hardware tab,
> Device Manager button) with the device connected and delete the device
> from Device Manager.
>
> --
> Rob Borek
> Microsoft MVP - Mobile Devices
> Want *ONE ON ONE* support? http://www.pocketpcone2one.com
> Please place all replies into the newsgroup so that others can benefit.


"Herk" <hverheul@xxxxxxxxxxxxxx> wrote in message
news:%23rxJSx6GGHA.1452@xxxxxxxxxxxxxxxxxxxxxxx
>I have an audiovox xv6600 and cannot cync either. it will connect and the
>green icon shows on the task bar but nothing happens. When I rightclick
>on the icon and select "Explore" I get the following message in a dialog
>box entitled "Failed to Start Remote Server"; Critical communications
>services have failed to start. Try resetting the mobile device and then
>reconnect again." I reset and reconnected but have the same problem.
>
> "Raj Pillai" <YouMeAndTheMail@xxxxxxxxxxxx> wrote in message
> news:e5R5XgqGGHA.2632@xxxxxxxxxxxxxxxxxxxxxxx
>> Peter,
>>
>> Are you using any firewall software? These tend to block the ports
>> required for a successful sync.
>>
>> --
>> Regards,
>> Raj Pillai
>> Microsoft MVP - Mobile Devices
>> http://www.pocketpcfaq.com/raj
>>
>>
>> "PETER BUTTIGLIERI" <cornwallonhudson@xxxxxxxxxxx> wrote in message
>> news:e7rQsDgGGHA.3036@xxxxxxxxxxxxxxxxxxxxxxx
>>> Using Windows XP and it is updated.
>>>
>>> Janice Fuller
>>> ekdewine@xxxxxxx
>>> "Lance Gardner" <Lgardner@xxxxxxxxxxxxxxxx> wrote in message
>>> news:%23NJHXxjFGHA.376@xxxxxxxxxxxxxxxxxxxxxxx
>>>> Can't get Activesync 3.8 to open so I can create a Partnership.
>>>> Activesync wasn't connecting to my Pocket PC. So I un-installed
>>>> activesync, removed the folder off the desktop. Re-installed Activesync
>>>> 3.8 plugged in the USB cable and cradle. Green icon on desktop tray
>>>> says "connected", but nothing happens when I try and open the
>>>> application
>>>>
>>>> Lance
>>>>
>>>
>>>
>>
>>
>
>


.