Re: ActiveSync 4.1 Still does not work...



Hi,
Did you setup all the firewall rules for ActiveSync 4.1? See
http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x.htm #1.


--
Chris De Herrera
http://www.pocketpcfaq.com
http://www.tabletpctalk.com
http://www.pocketpctalk.com
http://www.mobilitytalk.com

ActiveSync 4.x Troubleshooting Guide -
http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x.htm

"ckelsoe" <charles@xxxxxxxxxx> wrote in message
news:eoHFvjAEGHA.208@xxxxxxxxxxxxxxxxxxxxxxx
> Here is what I have done to try to resolve this issue. Any feedback would
> be appreciated.
>
> Environment:
>
> Windows XP with SP 2 and all patches / updates
>
> Connected to network, not connected to domain
>
> Static IP Assigned (changed to dynamic as part of diagnostics)
>
> I-MATE K-JAM Phone with WM 5.0
>
>
>
> Symptom: ActiveSync shows it is connecting but never connects.
>
>
>
> Observations:
>
> 1.. Setting the Tray notification on the Windows Mobile based Device
> shows a connection.
> 2.. Running Ethereal shows that the port 5679 is unreachable.
> 3.. The device shows the following message after a time: "Unable to
> obtain a server assigned IP Address". Changing to a static ip on the
> device makes no difference.
> 4.. User is administrator
> 5.. Tried 8 different USB ports including those directly attached to the
> motherboard.
> 6.. The device shows up as connected in the Network Connections area.
> 7.. Followed steps at
> http://www.pocketpcfaq.com/wce/activesync3.1remove.htm to totally remove
> ActiveSync and try again.
> 8.. ActiveSync 3.x worked on this machine prior to purchase of new phone.
>
>
>
>
> Things I have done to attempt to resolve:
>
> 1.. Uninstall and reinstall ActiveSync 4.1 many times with reboots in
> between uninstalls and reinstalls.
> 2.. Run WinsockFix -
> http://www.softpedia.com/get/Tweak/Network-Tweak/WinSockFix.shtml.
> 3.. Verified that checkmarks are beside Client for MS Networks, File and
> Print Sharing for MS NW, Internet protocol
> 4.. Booted up in Safe Mode with Networking
> 5.. Ran NetStat -a (See attached)
> 6.. Ran TCPView (See Attached)
> 7.. Ran FPORT (See Attached)
> 8.. Ran TDIMON (see attached)
> 9.. Added the following to the registry:
> 10..
> [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters]
> 11.. "MaxPacketSize"=dword:00000001
> 12.. Specifically opened port 5679 in Windows Firewall
> 13.. Ran NetSH Winsock Reset
> 14.. Do an in place upgrade to Windows XP with SP 2
> 15.. Verified that the DHCP Client Service is running on the PC
> 16.. Ping from desktop to 169.254.2.1 (PPC) was successful
> 17.. Run Start / Run / devmgmt.msc and look under "Network Adapters" as
> "Windows Mobile Device #xx" where xx seems to vary depending on which usb
> port you are plugged in to.
> 18.. Ran ipconfig/all to confirm that "Windows Mobile Device #xx" shows
> up with an IP address of 169.254.2.2 and the DHCP server listed at
> 169.254.2.1
> 19.. Run "Route print" as command prompt to verify that there are routes
> there for the 169.254.2.2 interface.
>
>


.



Relevant Pages

  • Re: ActiveSync 4.1 Still does not work...
    ... ActiveSync shows it is connecting but never connects. ... Setting the Tray notification on the Windows Mobile based Device shows ... Tried 8 different USB ports including those directly attached to the ...
    (microsoft.public.pocketpc.activesync)
  • Re: PPC MSMQ Help!
    ... Hence ActiveSync can't forward ... You can change the ports that MSMQ on CE listens on and then change ... You can change the port and pingPort MSMQ listensn on by running the command ... I'm am connecting over a USB cable using active sync. ...
    (microsoft.public.pocketpc.developer)
  • Re: ActiveSync 4.5 Beta fails to communicate with bluetooth serial
    ... Uninstalled the Widcomm drivers and let Windows drivers take over the ... Uninstalled ActiveSync 4.5 beta and installed ActiveSync 4.2. ... Ensure that the bt serial port on the laptop is on a COM port which your ...
    (microsoft.public.pocketpc.activesync)
  • ActiveSync 4.1 Still does not work...
    ... ActiveSync shows it is connecting but never connects. ... Setting the Tray notification on the Windows Mobile based Device shows ... Running Ethereal shows that the port 5679 is unreachable. ...
    (microsoft.public.pocketpc.activesync)
  • Re: ActiveSync 4.1 Still does not work...
    ... Are you connecting the device using the USB cable ... > Activesync 4.1 UK downloaded on 31.12.2005 installed after complete ... ActiveSync shows it is connecting but never connects. ... Running Ethereal shows that the port 5679 is unreachable. ...
    (microsoft.public.pocketpc.activesync)

Loading