Re: Trying to connect with HP IPAQ hx2795
- From: "Rick Spiewak" <rickspiewak@xxxxxxxxxxxxxx>
- Date: Fri, 30 Dec 2005 10:15:17 -0500
I think the firewall (Zone Labs) *should* be open - instead of opening
ports, I put the network into the Trusted zone. The settings there are to
exclude, rather than include, ports. But I still have the same results (or
lack thereof).
USBView does show the device, and I've set the network connection to show
itself - which it does, as connected at 10Mbps.
wcesmgr.log apparently only updates when ActiveSync closes. The previous
entry was:
**** ActiveSync (4.1.4841 RETAIL) started, Cmd line: '/show'
12/30/2005 10:03:09.490 **************** Logging Started ****************
12/30/2005 10:03:09.490 Process C:\Program Files\Microsoft
ActiveSync\WCESMgr.exe p(2776)
12/30/2005 10:03:09.490 ActiveSync second instance started, Cmd line:
'/show'
12/30/2005 10:03:09.490 ActiveSync second instance exiting
12/30/2005 10:03:09.490 **************** Logging Stopped ****************
WDCESLog.log latest entries are:
12/30/2005 08:57:35.984 **************** Logging Started ****************
12/30/2005 08:57:35.984 Process C:\PROGRA~1\MICROS~3\rapimgr.exe p(2860)
12/30/2005 08:57:35.984 p(2860) t(2900) RAPIMgr -> Enabling RAPIMgr process
for SessionID: 0, ProcessID: 2860 - rapimgr.cpp(1909)
12/30/2005 09:35:01.673 **************** Logging Started ****************
12/30/2005 09:35:01.673 Process C:\Program Files\Microsoft
ActiveSync\WCESMgr.exe p(2504)
outstore.log has no entries for today.
WCESCOMM.LOG shows:
12/30/2005 08:57:23.075 - Windows CE Services (4.1.0) Communication Logging.
12/30/2005 08:57:23.075 - IrUtil: IrDA socket cannot be created, error code
10093.
12/30/2005 08:57:23.075 - Windows CE Services Communication started.
12/30/2005 08:57:38.647 - Started desktop passthru TCP2UDP component
12/30/2005 08:57:38.647 - Connection: Prep for a new socket connection.
12/30/2005 08:58:08.641 - Desktop Locked.
12/30/2005 09:06:57.110 - Desktop unlocked.
12/30/2005 09:22:54.177 - USB RNDIS: Device Arrival notification
12/30/2005 09:25:04.334 - USB RNDIS: Device Removal notification
12/30/2005 09:25:26.285 - USB RNDIS: Device Arrival notification
12/30/2005 09:37:42.244 - USB RNDIS: Device Removal notification
12/30/2005 09:38:09.052 - USB RNDIS: Device Arrival notification
12/30/2005 09:43:26.028 - USB RNDIS: Device Removal notification
12/30/2005 09:44:20.887 - USB RNDIS: Device Arrival notification
12/30/2005 09:49:30.772 - USB RNDIS: Device Removal notification
12/30/2005 09:56:06.091 - USB RNDIS: Device Arrival notification
12/30/2005 10:01:48.133 - USB RNDIS: Device Removal notification
12/30/2005 10:02:54.809 - USB RNDIS: Device Arrival notification
"Chris De Herrera" <spam@xxxxxxxxxxxxxxxx> wrote in message
news:uHA6uH%23CGHA.2732@xxxxxxxxxxxxxxxxxxxxxxx
> Hi,
> Did you allow all ActiveSync components to bypass the firewall?
>
> See http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x.htm
>
> "If you are using a software firewall on your PC, you need to allow
> ActiveSync to use TCP/IP. ActiveSync uses the programs WCESCOMM.EXE,
> WCESMGR.EXE, RAPIMGR.EXE, and CEAPPMGR.EXE and TCP/IP ports 990 (RAPI),
> 999 (Status), 5678 (Legacy Replication), 5679 (Legacy Replication), 5721
> (Desktop Passthrough), and 26675 (AirSync). Also, ActiveSync uses
> 169.254.2.1 for your PC and 169.254.2.2 for your Windows Mobile 5.0
> device. When you install ActiveSync 4.0 on Windows XP, Service Pack 2 and
> Windows Server 2003 it should configure the firewall exceptions for
> ActiveSync automatically for you."
>
> Also, since this is a more complex setup, you may want to take a look at
> the ActiveSync 4.x Connection Flow FAQ -
> http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x-connection.htm
>
>
> --
> Chris De Herrera
> http://www.pocketpcfaq.com
> http://www.tabletpctalk.com
> http://www.pocketpctalk.com
> http://www.mobilitytalk.com
>
> ActiveSync 4.x Troubleshooting Guide -
> http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x.htm
>
>
> "Rick Spiewak" <rickspiewak@xxxxxxxxxxxxxx> wrote in message
> news:eRyeWE9CGHA.344@xxxxxxxxxxxxxxxxxxxxxxx
>> OK, I found CEAPPMGR.exe, and configured it. I did a soft reset, and
>> tried connecting again - still seems to hang on the Connecting state.
>>
>> "Rick Spiewak" <rickspiewak@xxxxxxxxxxxxxx> wrote in message
>> news:uMyhB88CGHA.4004@xxxxxxxxxxxxxxxxxxxxxxx
>>>I am able to connect this device with ActiveSync 4.1 on my home PC (XP
>>>SP2). I resolved some initial problems by using a Cardbus USB 2.0 instead
>>>of my hub connected to the USB 1.1 port on my laptop.
>>>
>>> My work PC is more complicated - ZoneAlarm and the Cisco VPN client are
>>> both active. I've follwed the ZoneAlarm recommendations (although I
>>> don't see CEAPPMGR.exe under any heading unless it has morphed into
>>> WCESmgr.exe.
>>>
>>> When I connect the Pocket PC (it runs Windows Mobile 5.0), ActiveSync
>>> comes up and stays in the Connecting mode forever.
>>>
>>> Any help would be appreciated! TIA.
>>>
>>
>>
>
>
.
- References:
- Trying to connect with HP IPAQ hx2795
- From: Rick Spiewak
- Re: Trying to connect with HP IPAQ hx2795
- From: Rick Spiewak
- Re: Trying to connect with HP IPAQ hx2795
- From: Chris De Herrera
- Trying to connect with HP IPAQ hx2795
- Prev by Date: Re: Downgrade from 4.1 to 3.8 - Can't Explore
- Next by Date: Re: Can't install Activesync 4.x
- Previous by thread: Re: Trying to connect with HP IPAQ hx2795
- Next by thread: Sync Problem
- Index(es):
Relevant Pages
|
