Re: Problem with AS 4.1 and USB

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Ah, if you can browse the device, than the RAPI component is working and TCP
communication between the device and PC is working.

Can you send me the logs from %TEMP%\wces*.log to my email address without
the online part?

Thanks,
Carl Wolz [MSFT]
This Posting is provided "AS IS" with no warranties, and confers no rights.

"Ulf E" <p999uel@xxxxxxx> wrote in message
news:eZ2eCcx9FHA.2832@xxxxxxxxxxxxxxxxxxxxxxx
> Hi Carl
>
> I have as said in my first post, set in my firewall to allow both tcp/udp
> and i allow every port there is
> This dont work
> I have also mad sure to uninstall firewall to make sure this isnt the
> problem, still not working
>
> In desktop USB is checked
>
> Where do find the USB to check on phone?
>
> If I disconnect and reconnect again, I cant even get desktop to tell me
> that it's connecting
>
> Although, I can perfectly transfer files using Explorer, so I think that
> the USB is working perfectly.
>
> This is getting me (more) gray hair =)
>
> /Uffe
>
>
> "Carl Wolz [MSFT]" <carlw@xxxxxxxxxxxxxxxxxxxx> wrote in message
> news:eloYxVt9FHA.3360@xxxxxxxxxxxxxxxxxxxxxxx
>> Sorry, but it still looks like a firewall or VPN issue. You might want to
>> verify that the USB connection boxs are checked on both desktop and
>> device.
>>
>> Ensure that the following TCP ports are open for incomming connections.
>> 990
>> 999
>> 5678
>> 5679
>> 5721
>> 26675
>>
>> And a UDP outgoing port of.
>> 5679
>>
>>
>> --
>> Carl Wolz [MSFT]
>> This Posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>>
>>
>>
>> "Ulf E" <p999uel@xxxxxxx> wrote in message
>> news:%23l15wrp9FHA.3772@xxxxxxxxxxxxxxxxxxxxxxx
>>>I am having the same problems and the same configuration
>>> I can ping at 169.254.2.1 but still AS just says Connecting and at last
>>> just
>>> "dies" after a couple of minutes
>>>
>>> Have allowed :
>>> a.. WCESMgr
>>> b.. wcescomm
>>> c.. rapimgr
>>> d.. CEAPPMGR
>>> full access on both TCP and UDP on all ports, and even turned off
>>> F-Secure
>>> and Personal Tiny Firewall
>>>
>>> Can't get this sync to work.
>>>
>>> /Ulf
>>>
>>> "Carl Wolz [MSFT]" <carlw@xxxxxxxxxxxxxxxxxxxx> wrote in message
>>> news:%23uDXjhd9FHA.3048@xxxxxxxxxxxxxxxxxxxxxxx
>>>> Is the TCP/IP protocol checked in the "Windows Mobile..." Network
>>>> Connection? The device will need to be plugged in for it to show up as
>>>> a network connection.
>>>>
>>>> Does the RNDIS interface have a IP address? (it should be 169.254.2.2)
>>>>
>>>> Can you ping the device once plugged in "ping 169.254.2.1"?
>>>>
>>>> --
>>>> Carl Wolz [MSFT]
>>>> This Posting is provided "AS IS" with no warranties, and confers no
>>>> rights.
>>>>
>>>>
>>>> "funkchri" <junk@xxxxxxxxxxxxxxxxx> wrote in message
>>>> news:1133344323.821817.227520@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>>>> Hi,
>>>>>
>>>>> At the beginning of November, I had ActiveSync 4.0 perfectly working
>>>>> on
>>>>> my business PC (Outlook 2003, Win XP SP2). Then I installed AS 4.1 and
>>>>> the connection to the PPC could not be established again.
>>>>>
>>>>> I tried multiple times to uninstall 4.1 and reinstall 4.0 but never
>>>>> got
>>>>> it running again. Also I tried to get rid of the new USB drivers by
>>>>> deleting the corresponding OEMxx.inf file.
>>>>>
>>>>> At the moment I have 4.1 reinstalled again (not working).
>>>>>
>>>>> When I plug in the device now, in device manager there is an entry
>>>>> under network adapters saying "Windows Mobile-based Device #7" which
>>>>> vanishes when unplugging the device. So the detection of the device by
>>>>> the OS seems to be working.
>>>>>
>>>>> When I search for connections with AS 4.1, the device is _not_
>>>>> automatically detected and the explicit search ends up with "USB
>>>>> Error"
>>>>> in the connection list.
>>>>>
>>>>> In WCESCOMM.LOG there is a line saying "USB: Failure to open driver,
>>>>> error 2"
>>>>>
>>>>> My business PC:
>>>>> - no local Firewall activated on this PC
>>>>> - VPN client (disabled)
>>>>> - McAffee VShield
>>>>> - I have local administrator rights but I cannot reinstall Outlook or
>>>>> things like that
>>>>>
>>>>> Has anyone an idea?
>>>>>
>>>>> BTW: On my PC at home (Win 2k SP4) AS 4.1 works properly with this
>>>>> PPC,
>>>>> so it should be no problem of the PPC device.
>>>>>
>>>>> Christian
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>


.

Relevant Pages

  • Re: Netgear FR114P or Linksys BEFSX41
    ... > has the option to connect via USB or parallel. ... >> ISP port 80 blocking. ... >> you'll assign the printer driver to and that's about it. ... >> got around that problem by connecting the printer to on PC by the ...
    (comp.security.firewalls)
  • Re: ActiveSync 4.1 Still does not work...
    ... Are you connecting the device using the USB cable ... > Activesync 4.1 UK downloaded on 31.12.2005 installed after complete ... ActiveSync shows it is connecting but never connects. ... Running Ethereal shows that the port 5679 is unreachable. ...
    (microsoft.public.pocketpc.activesync)
  • Re: I need ideas for printer setup
    ... We have develop a device that is connecting a PC parallel port to USB ... Bob on Waitrose wrote: ...
    (comp.sys.acorn.hardware)
  • Re: Netgear FR114P or Linksys BEFSX41
    ... It has the best firewall features I've ... > can get around the nasty ISP port 80 blocking. ... > problem by connecting the printer to on PC by the USB port. ...
    (comp.security.firewalls)
  • Re: SMTP Service will not start.
    ... Searching for Exchange external DNS settings. ... Checking MX records using TCP: ... Connecting to mx3.hotmail.com on port 25. ...
    (microsoft.public.exchange.admin)