USB Active sync problem

I am using the Motorola i.MX21 processor for developement of my WinCE
device. My eventual task is to run my own custom tests via the CETK on the
device. Using the Motorola ADS developement board, I have no problem
connecting to the PC and Active sync allows me to set up a partnership with
the device. I can use CETK and connect up to the device and run default
tests on the dev board. However, when I connect to my own custom board and
connect via USB, Activesync does not allow a connection to the device. The
device manager on my PC (WIndows XP with SP2) recognises the USB connection
by listing the device under Windows CE USB devices->Microsoft USB sync. Yet
trying to connect to Active sync does not yield any results, even though is
identifies my USB as being installed.
I have compared the Catalog Items listed in the Platform build for the ADS
dev board and have included the exact items in my build. I have also added
registry entries that Active sync requires to connect to the PC. I have also
tried to connect to the custom device via the CETK using various
combinations for transport and startup servers but with no success.

Any assitance would be greatly appreciated.
Thanks
Dees


.

Relevant Pages

  • USB Active sync problem
    ... My eventual task is to run my own custom tests via the CETK on the ... connect via USB, Activesync does not allow a connection to the device. ... trying to connect to Active sync does not yield any results, ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Active Sync 3.8 hangs my PC
    ... Since your device is custom, you will need to contact the hardware designer ... I would suspect thatt tthe problem could be in the USB ... > I use a custom Windows CE device that I connect to my Dell PC over USB ... > What happens is the the Active Sync app hangs and so does the entire ...
    (microsoft.public.pocketpc.activesync)
  • Re: developing Application software for a host to communicate with a USB device
    ... Standard HID device ... Custom device type ... Is there any cross-platform library for USB communication? ... Serial port devices are intended to be used just ...
    (comp.arch.embedded)
  • Re: Custom ICON display in device manager
    ... Read this faq (What device setup class should I use for a custom USB ... > class GUID is failing CheckINF test in HCT. ... > So I got a drirectve from microsft WHQL team to use the standard class ...
    (microsoft.public.development.device.drivers)
  • Re: usb host CETK skipped
    ... generated a Loopback DLL for our function driver. ... USB Function Driver. ... trying to setup a test between the CEPC running the USB Host CETK with our ...
    (microsoft.public.windowsce.embedded)