Re: ActiveSync Connection

Tech-Archive recommends: Fix windows errors by optimizing your registry

Hi Clem,

The lock up issue you are experiencing is not normal. From your previous
posts, it appears you have done most of the troubleshooting yourself. With
respect to the firewall and antivirus make sure you have shut them down and
have not merely disabled it. I too use ZoneAlarm so you might want to check
if the necessary ports are open for communication. Refer -
http://www.pocketpcfaq.com/raj/ZA.html

If possible, I would suggest you perform a backup and then perform a hard
reset and check it solves your problem.

--
Regards,
Raj Pillai
Microsoft MVP - Mobile Devices
http://www.pocketpcfaq.com/raj


"Clem Nichols via PocketPCJunkies.com" <forum@xxxxxxxxxxxxxxxxxxx> wrote in
message news:27614af4168a43ab81d474893c78c66e@xxxxxxxxxxxxxxxxxxxxxx
> Raj:
>
> I've done so many soft resets I've almost worn out my stylus. As I said
> in
> my original post, my iPAQ "locks up" whenever I place it into the cradle
> while the cradle is plugged into any USB port on my PC. (Is this normal?)
> When I remove the PDA from the cradle I have to do a soft reset to get it
> to respond to any input either by the stylus or any of the buttons. My
> last successful connection was a few weeks ago when I installed Microsoft
> Pocket Streets. I've made no other changes since then. I have Zone Alarm
> firewall and Norton Anti-Virus. Turning them both off seems to make no
> difference with my problem. Thanks for your response.
>
> Clem Nichols
> --
> Clem Nichols
>
>
> Message posted via PocketPCJunkies.com
> http://www.pocketpcjunkies.com/Uwe/Forums.aspx/pocket-pc-activesync/200505/1



.

Quantcast