Re: Problem with movie in presentation mode

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Ah yes....the lacking Vista drivers strike again. It works in WinXP. I have
an ATI laptop I can try when I get home this weekend. There are updated
mobile drivers available at www.laptopvideo2go.com. These folks modify the
factory dirvers to work on mobile systems. Problems like this are why I have
not moved to Vista on my main show systems. Too many options have been left
out so far. At this point you will probably have to do the primary display
swap.........TD

"LisaM" wrote:



This is Lisa (Chris is back at school)- I have an HP compaq nc6000 with
Intel Centrino. Yesterday we tried to turn down the graphics acceleration
following the instructions. The problem is that we were not given that option
by my system. Vista is a little different and I don't know if that has
anything to do with it, but when we got to the right place, the option to
adjust the acceleration was grayed out. We in essence came to a blank wall
and didn't know what to do next. ???

"TDunn" wrote:

Chris et al.........

I have experimented with this on the three prominent mobile chipsets. The
Intel was actually the easiest one to work with.....go figure. Anyway.....I
have been able to get video on both screens on each chipset by turning down
the hardware acceleration. I know it's counter-intuitive but it works.
Please try it. I used to do the primary swap but don't need to any longer
unless I'm running one of my addins that needs it. Instructions are in the
link in my first post.

.........................TD

"LisaM" wrote:

This is Chris trying to help Lisa.

First of all, thank you Austin for your information.

The trouble I'm having is switching the primary and secondary display.
Please read the response to Brian Lynn for the graphics system information.
Since her presentation is tomorrow, I am going to add in a hyperlink as a
temporary solution if the video will not work.

Please let me know if you have anymore input.

"Austin Myers" wrote:

Lets see if I can help.

First off, if you move the presentation and videos to another machine, move
them to a folder with a short path. (Example: C:\Mystuff) Do NOT place
them on the desk top as this may have a very long path!

PowerPoint plays all videos as an "overlay". What that means in friendly
terms is that the video card displays PowerPoint on the screen as expected,
and then plays the video on top of that by using memory set aside for it on
the video card. (Hence the term overlay)

The vast majority of video cards support overlays on one screen or the
other, but not both at the same time. (There are a few that aren't limited
like this but they tend to be high end cards.)

You can usually get around this limitation by swapping out the primary and
secondary monitor and then telling PPT to play one the one desired.


Austin Myers
MS PowerPoint MVP Team

Provider of PFCPro, PFCMedia and PFCExpress
www.playsforcertain.com


"LisaM" <LisaM@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:0F73C7CF-C4EC-49CF-B06B-86BFCD12EB62@xxxxxxxxxxxxxxxx
I do a lot of speaking and have just started adding movie clips to my
presentations. I have been editing the video clips with windows movie
maker.
Now I've had this problem both with XP/Office 2003 and Vista/Office 2007.
The clip plays just fine on my computer during the presentation, but on
the
projected screen there is just a black box. The rest of the presentation
is
fine. This has happened at different conferences with different
projectors.
I've wondered if it had anything to do with how I saved the video clip
(there
are so many choices and I don't really know what I'm doing). Tech support
at
the conferences have been stymied, and my colleagues have not had this
problem. One colleague says there may be a setting "buried deep the
computer" that allows the movie to project in both places at once. ??? I
need
help-- I'm leaving tomorrow for another conference and need to solve this
quickly!



.

Relevant Pages

  • Re: trying to find AUDIO CODEC down load for vista
    ... Maybe, it’s my machine- Sony Vaio, Vista Home Premium, SP1. ... See http://zachd.com/pss/pss.html for some helpful WMP info. ... what I think he did was take long clips and cut them up into ... home video clips by using Window Movie Maker. ...
    (microsoft.public.windows.vista.music_pictures_video)
  • Re: Inspiron Laptop Configurations
    ... It looks like the 1525 line comes with the 1280x800 screen, and Vista, ... screen, and XP Home, and no video card. ... You might also check the Outlet for Inspiron 1520's with a dedicated video ...
    (alt.sys.pc-clone.dell)
  • Re: WMP 11 problem with streaming video on Vista
    ... I am also facing same problem, It's seem that problem happend with vista ... decode and codec but not useful. ... window (toolbar player) there seems no requirement for the graphics ... typically overlays and/or directX video ...
    (microsoft.public.windowsmedia.player)
  • Re: E1505 Ordering Question: ***DELL READ THIS***
    ... will not run Vista with Aero. ... There are three video options for the E1505: ... you can only run Vista with Aero on ... no "compatability warning" if you select the base video. ...
    (alt.sys.pc-clone.dell)
  • Re: Video Error
    ... At that time I would get "VIDEO ERROR" trying to watch TV ... I upgraded to an ATI Radeon 9550 card with 128M of ram made by VisionTek. ... I have you tried running WinUpdate on Vista or checked the ATI Website to ... DVD with MCE instead of Media Player?. ...
    (microsoft.public.windows.mediacenter)