Re: Speaker sound after installing WMP11

Hi Lizzie,

First of all - friendly advice: please tell OS you are using, than a bit
more info about you audio/video equipment.

Secondly, I would say that Lez was right about speakers whether they are USB
or whatever. Speakers cannot bring any sound effects (if any effects J). I
guess what you may google-read was USB speakers, which in addition have
amplifier (good or bad) and most likely some Software to install:. So don't
rush to by new speakers yet. They will echo/reverberate with greater quality
J if problem not solved.

What to check?

1) use headphones. Connect them where currently your speakers are
connected

(not to the auxilary audio input)

Do you still have echo?

2) microphone in your settings must have ->"Mute" checked.

And move mic further from speakers (not a cure but may interfere)

3) test the above with speakers.

4) Sound effects.

- for clear experiment turn "Off" SRS WOW in WMP if it is "On" (it is
crap anyway);

- go to WMP Options Plug-Ins and uncheck (temporarily) all audio
Plug-Ins, if any;

5) Now back to Sound Effects Manager. Most audio cards and Mother Board
built-in sound chip provide you with that during driver installation. For
example, Realtek on-board installs SoundMan.exe. Have you installed/upgraded
driver yourself? If not it may be there and some settings went wrong.

The 2 first settings to look at are Karaoke (sometimes it is separate one) -
uncheck and Sound effects - set to "no effects".

You have to look at your startup programs. If you don't have any system
guard for sniffing startup changes driver install/update will install it
silently. And it may not necessarily shows up in sys tray. But one of the
indications would be: you have front/side/rare/subwoofer in your Volume
control.

That's all I can suggest for now without knowing your audio card and its'
driver.

Regards




.

Relevant Pages

  • Re: Speaker sound after installing WMP11
    ... I would say that Lez was right about speakers whether they are ... Speakers cannot bring any sound effects (if any effects ... Board built-in sound chip provide you with that during driver ... guard for sniffing startup changes driver inse will install it silently. ...
    (microsoft.public.multimedia.windows.mediaplayer)
  • Re: SB Live! sound card & Win XP
    ... received a messge saying that no sound blaster cards were detected on my ... MSB0200320152655 and a set of Creative Cambridge Soundworks 200 Speakers. ... Creative no longer posts these drivers (only updates). ... downloaded the updates from the SB web site and attempted to install them ...
    (microsoft.public.windowsxp.hardware)
  • Re: SB Live! sound card & Win XP
    ... When attempted to install them I received a messge saying that no sound ... MSB0200320152655 and a set of Creative Cambridge Soundworks 200 Speakers. ... received a messge saying that no sound blaster cards were detected. ...
    (microsoft.public.windowsxp.hardware)
  • Myrtle Beach 2007 - 1st Saturday
    ... Went down this morning to get J&M speakers in my Ultra. ... there but didn't install. ... They were offering Boss Hoss demos. ... Shortly there after Dan shows and Dan ...
    (rec.motorcycles.harley)
  • Re: SB Live! sound card & Win XP
    ... After you did the install from the CD, did you go and do the updates from Creative? ... MSB0200320152655 and a set of Creative Cambridge Soundworks 200 Speakers. ... In other words, left rear, right rear, ...
    (microsoft.public.windowsxp.hardware)
Loading