Re: Acquiring YV12 codec?

From: Ed (eddiemarino_at_hotmail.com)
Date: 03/14/04

  • Next message: Alessandro Angeli [MVP::DigitalMedia]: "Re: Acquiring YV12 codec?" 
    Date: Sun, 14 Mar 2004 12:42:37 -0500

    Thanks. Tried DxDiag.exe. Got the following results in the Display test:

    DirectDraw test results: All tests were successful.

    Direct3D 7 test results: Failure at step 8 (Creating 3D Device): HRESULT =
    0x887602eb (error code)

    Direct3D 8 test results: Failure at step 8 (Creating 3D Device): HRESULT =
    0x8007000e (Out of memory)

    Direct3D 9 test results: Failure at step 8 (Creating 3D Device): HRESULT =
    0x8007000e (Out of memory)

    "Alessandro Angeli [MVP::DigitalMedia]" <nobody@nowhere.in.the.net> wrote in
    message news:OBgJiPdCEHA.3568@tk2msftngp13.phx.gbl...
    > Check if hardware acceleration is enabled in Control
    > Panel -> Display -> Settings -> Advanced -> Troubleshooting
    > and, inside WMP, in Tools -> Options -> Performance and, in
    > this same place, go to Advanced and see what is enabled
    > (everything should be checked in the Video Acceleration
    > section).
    >
    > If you have DivXG400 or ffdshow and so on... installed,
    > disable them.
    >
    > Run DxDiag.exe and see whether in the Display panel
    > everything is enabled and the tests are successful.
    >
    > Does mplayer2.exe (you have it) play the files?
    >
    >
    >
    > Ed wrote:
    >
    > > Basically, I see a red ! beside the WMV file in the
    > > playlist.
    > >
    > > I have a nVidia GeForce video card.
    > >
    > >
    > > "Alessandro Angeli [MVP::DigitalMedia]"
    > > <nobody@nowhere.in.the.net> wrote in message
    > > news:OIs1PGXCEHA.2620@TK2MSFTNGP12.phx.gbl...
    > >> Ed wrote:
    > >>
    > >>> Some of the WMV files that I have require YV12. Where
    > >>> could I get this?
    > >>
    > >> What is the exact error and behavior? If WMP tells you
    > >> you need an YUV codec, most likely it have some video
    > >> driver issue. This happens when you have a non-standard
    > >> configuration where use of an accelerated video overlay
    > >> surface is forced (like with some configuration of
    > >> DivXG400, ffdshow, DivX5...) and such a surface is not
    > >> available because it's already used by some video or
    > >> video acceleration is turned off in the player or in the
    > >> system or the video driver does not support it.
    > >>
    > >> --
    > >>
    > >> /**
    > >> * Alessandro Angeli
    > >> *
    > >> * MVP :: Digital Media
    > >> *
    > >> * a dot angeli at biosys dot net
    > >> */
    >
    > --
    >
    > /**
    > * Alessandro Angeli
    > *
    > * MVP :: Digital Media
    > *
    > * a dot angeli at biosys dot net
    > */
    >
    >

  • Next message: Alessandro Angeli [MVP::DigitalMedia]: "Re: Acquiring YV12 codec?"

    Relevant Pages

    • Solving Ax=b for large sparse matrix(1e+6 X 1e+5) and cholinc failure
      ... and Matlab gives me out of memory error. ... is CHOLMOD's numeric Cholesky factorization successful? ... Entries with abs. ... Forecast number of Integer entries in factors: ...
      (comp.soft-sys.matlab)
    • Re: Solving Ax=b for large sparse matrix(1e+6 X 1e+5) and cholinc failure
      ... and Matlab gives me out of memory error. ... automatic reordering) successful? ... AMD ... Forecast number of Integer entries in factors: ...
      (comp.soft-sys.matlab)
    • Re: Print PDF
      ... If I then quite that file and try another it is successful. ... memory for that application it manages to corrupt elements of the other ... Symptom happens when MiniDisc is running, stop MiniDisc and try again and ... the symptom does not occur - what would your first working hypothesis be? ...
      (comp.sys.acorn.apps)
    • Only pair numbers on display ?????
      ... So no segments missing no display error as such, but BIT 1 missing in the ... memory or structure that holds the numbers during display test.(If you add ... Boards starts up fine with game roms of Mata-hari and X and O's, ...
      (rec.games.pinball)
    • Re: help: class compile error
      ... > I use new to create a CTest. ... > deletion is not successful. ... (unless you assign it to another valid object first). ... calling delete does not cause the computer to go to that memory ...
      (comp.lang.cpp)