Re: Help with media server setup

I think I got it,
thanks
MC

"CAMC1" <webmaster@xxxxxxxxxxxx> wrote in message
news:e%23ARKMwcHHA.5052@xxxxxxxxxxxxxxxxxxxxxxx
Well I followed that arcticle, but here is the part I don't understand, I
only have 1 adapter, but how can bind 2 different IP address to 1NIC card,
where?
-one interface card-
MC

"Neil Smith [MVP Digital Media]" <neil@xxxxxxxxxx> wrote in message
news:14lq035ug6ntnndvpum1s9e016mjfaamm1@xxxxxxxxxx
On Thu, 29 Mar 2007 17:27:42 -0400, "CAMC1" <webmaster@xxxxxxxxxxxx>
wrote:

Hi
Installed windows 2003 server and media services and install Media
encoder,
I have 1 network adapter with 1 IP address bound to it, so I am
thinking
article# KB328728 does not apply to my problem.,


I(t definitely applies to your problem. You have skipped the important
part of the document, which I'll cut+paste here :

For both IIS and WMS to use port 80, one of the following two
conditions must be true:
. One (1) network adapter has at least 2 IPs bound to the
adapter.
. Two (2) network adapters have at least 1 IP bound to each
adapter.


Two services on one IP address cannot share the same port number.
Move IIS to another port (eg 8080) or bind a second IP address to the
network adapter, and run IIS off that IP address.

HTH
Cheers - Neil


So I enabled IIS on the same server, created a Virtual Directory
pointing
to
publishing point of the media server.
If I use PULL option on the encoder to publish live video,
I have no problem watching live video from web browser on different
computer
on the network, (while HTTP protocol is disabled on WMserver)

If I change to PUSH on the encoder, (which forces me to enable HTTP
protocol
on WMserver) then I can not watch it from the web browser
When I look at WMserver http protocol properties, I see 2 IP addresses
in
the list
1 with local IP address of the adapter, the other one is 127.0.0.1

Just in case, I followed the arcticle, added 127.0.0.1 using
WMSHttpsyscfg.exe,
opened HTTP protocol properties on WMServer, and selected my local IP
address for distribution of video.

It only works from any computer using
mms://servername/distributionPoint
but not with http://servername/distributionPoint.htm

Any idea, what I am missing?
Thanks
MC

------------------------------------------------
Digital Media MVP : 2004-2007
http://mvp.support.microsoft.com/mvpfaqs




.

Relevant Pages

  • Re: RWW 403 forbidden error
    ... network adapter there. ... Install and run a scan with the SBS 2003 BPA: ... All of the settings for Directory Security for the "Remote" virtual ... For RWW: ...
    (microsoft.public.windows.server.sbs)
  • Re: ipconfig and network connections empty - Device Manager okay
    ... adapter when the problem occurred. ... degree that in KB825826 the network connections _are_ working and just ... local area connection in the Network and Dial-up Connections folder. ... Trying to install a connection gets one to a screen where one can ...
    (microsoft.public.windowsxp.network_web)
  • Re: ipconfig and network connections empty - Device Manager okay
    ... adapter when the problem occurred. ... degree that in KB825826 the network connections _are_ working and just ... local area connection in the Network and Dial-up Connections folder. ... Trying to install a connection gets one to a screen where one can ...
    (microsoft.public.windowsxp.network_web)
  • Re: Linksys Wireless G USB Adapter issue..
    ... I once again install the adapter with the install CD... ... Windows does the "installing device driver' and gave me the same driver as before. ... I plug the adapter in and windows update goes to work. ...
    (microsoft.public.windows.vista.networking_sharing)
  • Re: wireless adapter recommendation
    ... get ready to install the software. ... this adapter. ... Here is what I see when the USB adapter is up ... Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 ...
    (Debian-User)