Re: Broadcast Error over Internet

Time to install WireShark and see what's happening on the network.

"Leartes" <no@spam> wrote in message
news:%238SszCJ7GHA.4476@xxxxxxxxxxxxxxxxxxxxxxx
I configured the WMS to listen for protocol
RTSP on Default Port (554) - Allowed all IP addresses to use
MMS on Default Port (1755) - Allowed all IP addresses to use

here is the related lines(for ports 554 and 1755) of the "netstat -aon"
command result

Proto Local Address Foreign Address State PID
TCP 0.0.0.0:554 0.0.0.0:0 LISTENING 2072
TCP 0.0.0.0:1755 0.0.0.0:0 LISTENING 2072
UDP 0.0.0.0:1755 *:* 2072

It seems listens on port 554 and 1755 but when i tried
"telnet WAN_IP 554" -> It Fails
"telnet 127.0.0.1 554" -> It Success
"telnet WAN_IP 1755" -> It Success



"Mike Lowery" <selfspam@xxxxxxxxxxxxxxxx> wrote in message
news:eaebU3H7GHA.4604@xxxxxxxxxxxxxxxxxxxxxxx
Is WMS configured to listen on the correct IP address? Another test you can
try is "telnet IP 554". If you get a response then RTSP is working and
reachable.

"Leartes" <no@spam> wrote in message
news:e9O4rS96GHA.1012@xxxxxxxxxxxxxxxxxxxxxxx
Could you please help me.
I have installed the WMS on w2003 Std. Edition Server

The server has two WAN IP Address on one NIC
It has direct internet connection
It uses Windows Firewall (during the tests, I switched off the firewall)
The Plesk 7.5 is installed on the server

the protocols enabled on WMS are MMS and RTSP (HTTP is Disabled)
(I also tried to enable http protocol on port 81)

When I test the stream within MMC ;
mms://MACHINENAME/Sample_Broadcast -> Doesn't run, Gives Error
mms://WAN_IP_ADDRESS/Sample_Broadcast -> Doesn't run, Gives Error
(MACHINENAME resolves the WAN IP Address)
mms://127.0.0.1/Sample_Broadcast -> Success without any error.

What the problem is could be ?


Thanks in advance to everyone













.

Relevant Pages

  • WMP10 knocks on port 554...
    ... RTSP is the preferred protocl (this is even if MMS is ... connecting to WMS9 server will connect through RTSP. ... >- I have configured my firewall to accept packets on port ...
    (microsoft.public.windowsmedia.server)
  • RE: WMP10 knocks on port 554...
    ... I opened port TCP 554 and UDP 5004,5005, and I can connect to my Media ... came in on port 1755 (mms). ... > connect to the WMS 9 server using RTSP instead of MMS as ... > connecting to WMS9 server will connect through RTSP. ...
    (microsoft.public.windowsmedia.server)
  • RE: WMP10 knocks on port 554...
    ... firewall settings. ... bit obsolete when considering WMP9>...since the port settings for in/out TCP ... > connect to the WMS 9 server using RTSP instead of MMS as ...
    (microsoft.public.windowsmedia.server)
  • Re: Creating a Hyperlink or Link to WMV
    ... If clients are connecting via Windows Media Player 9.0 or newer, ... MMS. ... Try opening port 554 for RTSP. ...
    (microsoft.public.windowsmedia.server)
  • Is FreeBSD ready for desktop (Mozilla Flash)
    ... monitor,, somehow the install fails to detect ... "Macromedia Flash plugin is not available for FreeBSD. ... I quote again "Install the www/linuxpluginwrapper port. ... servers, ...
    (comp.unix.bsd.freebsd.misc)
Loading