RE: problem of setting up WMS

From: Jacky (Jacky_at_discussions.microsoft.com)
Date: 09/14/04

  • Next message: Tony: "Re: WMS 9 & Web Pages" 
    Date: Mon, 13 Sep 2004 21:31:03 -0700

    Hi Ravi,

       I have installed W2K3 enterprise on 3 others servers. Supprisingly The
    WMS in 3 servers are able to work and admin tools are installed smoothly. I
    really do not know what went wrong in my actual server. Will it be a problem
    in WMS installation if my server is not connected to the network?

    Regards
    Jacky

    "Ravi Raman" wrote:

    > Jacky,
    >
    > I presume you are running as Administrator on the server
    > box. It looks like the server seems to work just okay.
    > Just the Admin part is messed up for some reason.
    >
    > Few more questions:
    > 1. Can you try re installing just the Admin component?
    > 2. Since you anyway have IIS running, can you install
    > the "Web Administrator" and see if that works?
    > 3. Do you have another server on which you can try the
    > same scenario and see if WMS works on that?
    > 4. Was the server by any chance upgraded from an older
    > WIndows OS? If yes, can you do a clean install instead of
    > upgrade (if possible)?
    >
    > Considering there is no event logs concerning WMS
    > installation, I am at a loss at what could have gone
    > wrong.
    >
    > Thx,
    > Ravi
    > --
    > This posting is provided "AS IS" with no warranties, and
    > confers no rights.
    >
    > >-----Original Message-----
    > >Hi Ravi,
    > >
    > > I can see the %SystemDrive%\wmpub\wmroot getting
    > printed. I also have
    > >checked the event logs. there is a warning that - The
    > World Wide Web
    > >Publishing Service failed to enable bandwidth throttling
    > on site '2' because
    > >QoS Packet Scheduler is not installed. Therefore, I have
    > installed the QoS
    > >but the problem does not seem to go away.
    > >
    > > After installation of QoS Packet Scheduler, the only
    > warning is that HP
    > >NC7781 Gigabit Server Adapter: The network link is down.
    > Check to make sure
    > >the network cable is properly connected. I do not know
    > whether this will
    > >affect WMS as my server is not connected to network.
    > >
    > >Really thanks for your advice and help.
    > >
    > >Jacky
    > >
    > >
    > >"Ravi Raman" wrote:
    > >
    > >> Hi Jacky,
    > >>
    > >> I can't quite put a finger why your system does not
    > work,
    > >> especially after you have done a clean re-installation.
    > >>
    > >> Can you check if the following script actually runs on
    > >> your Windows Media Server? Can you copy the following 2
    > >> lines as a file called "test.vbs" and run it from
    > command
    > >> line as "cscript test.vbs" and let me know the output:
    > >>
    > >> Set obj = Createobject("WMSServer.server")
    > >> wscript.echo obj.PublishingPoints("/").Path
    > >>
    > >> If you actually see your %SystemDrive%\wmpub\wmroot
    > >> getting printed, it looks like just your WMS Admin
    > >> installation went wrong for some reason and your server
    > >> is probably fine.
    > >>
    > >> Do you see any events in the "Event Log" related to
    > >> Windows media services as a warning or error? Or any
    > >> other error in event log that you think may be related
    > to
    > >> WMS installation?
    > >>
    > >> Thx,
    > >> Ravi
    > >> --
    > >> This posting is provided "AS IS" with no warranties,
    > and
    > >> confers no rights.
    > >>
    > >>
    > >>
    > >> >-----Original Message-----
    > >> >May I know who has solution to my problem?
    > >> >thanks in advance
    > >> >
    > >> >Jacky
    > >> >
    > >> >"lmankit@dsta.gov.sg" wrote:
    > >> >
    > >> >> Hi,
    > >> >>
    > >> >> My present problem is that I do not see anything
    > >> under
    > >> >> Windows Media Services in the Windows Media Services
    > >> >> console. Instead "This version of Windows Media
    > >> Services
    > >> >> Snap-in doesn't provide multiple instances." is
    > >> >> displayed. If I attempt to add a server then "Error
    > >> >> Description: The RPC server is unavailable" is
    > >> returned.
    > >> >> I have re-installed the OS (W2K3) and WMS but the
    > >> same
    > >> >> problem still is there. May I know what I have
    > missed
    > >> out?
    > >> >>
    > >> >> Thanks
    > >> >> Jacky
    > >> >>
    > >> >.
    > >> >
    > >>
    > >.
    > >
    >

  • Next message: Tony: "Re: WMS 9 & Web Pages"

    Relevant Pages
    Loading