Re: WMP 11 installation troubles

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance


That's exactly the problem. WMP can't either. Either the permissions are
wrong or your registry is corrupt. If you can right-click on the key and
reset the permissions, you're in business. Otherwise, you may need to run a
registry restoration tool. In neither case will I have any premium advice
here: it's a registry access issue and I'm not going to have any better
advice than a good search for 'fixing registry corruption on Windows' would
likely give you. =\

--
Speaking for myself only.
See http://zachd.com/pss/pss.html for some helpful WMP info.
This posting is provided "AS IS" with no warranties, and confers no rights.
--

"Bryan" <Bryan@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:8DCC4C50-7E89-4803-8EEE-4286826E04B9@xxxxxxxxxxxxxxxx
Actually, I can't even open that key.
There is HKCR\WMP.Device and WMP\Device.1 and I can't open either.
When I try to open them, It says "Cannot open WMP.Device: Error while
opening key

Not sure how I can fix this, what do you think?

"zachd [MSFT]" wrote:


Looks you actually provided this the first time:
HKCR\WMP.Device
was in the original post.

Can you edit that key? That seems to be the corrupt key.

--
Speaking for myself only.
See http://zachd.com/pss/pss.html for some helpful WMP info.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--

"Bryan" <Bryan@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:BA6B6259-EA0F-4A41-8356-CA649AC4D53D@xxxxxxxxxxxxxxxx
#-336 Copying file
"c:\windows\softwaredistribution\download\7ebd512f015945a82f2b2e551ed20a74\advpack.dll"
to "C:\WINDOWS\system32\advpack.dll" via temporary file
"C:\WINDOWS\system32\SET1F5.tmp".
#W190 File "C:\WINDOWS\system32\SET1F5.tmp" marked to be moved to
"C:\WINDOWS\system32\advpack.dll" on next reboot.
#-336 Copying file
"c:\windows\softwaredistribution\download\7ebd512f015945a82f2b2e551ed20a74\iertutil.dll"
to "C:\WINDOWS\system32\iertutil.dll" via temporary file
"C:\WINDOWS\system32\SET200.tmp".
#W190 File "C:\WINDOWS\system32\SET200.tmp" marked to be moved to
"C:\WINDOWS\system32\iertutil.dll" on next reboot.
#-336 Copying file
"c:\windows\softwaredistribution\download\7ebd512f015945a82f2b2e551ed20a74\url.dll"
to "C:\WINDOWS\system32\url.dll" via temporary file
"C:\WINDOWS\system32\SET20B.tmp".
#W190 File "C:\WINDOWS\system32\SET20B.tmp" marked to be moved to
"C:\WINDOWS\system32\url.dll" on next reboot.
#-336 Copying file
"c:\windows\softwaredistribution\download\7ebd512f015945a82f2b2e551ed20a74\urlmon.dll"
to "C:\WINDOWS\system32\urlmon.dll" via temporary file
"C:\WINDOWS\system32\SET20C.tmp".
#W190 File "C:\WINDOWS\system32\SET20C.tmp" marked to be moved to
"C:\WINDOWS\system32\urlmon.dll" on next reboot.
#-336 Copying file
"c:\windows\softwaredistribution\download\7ebd512f015945a82f2b2e551ed20a74\wininet.dll"
to "C:\WINDOWS\system32\wininet.dll" via temporary file
"C:\WINDOWS\system32\SET20E.tmp".
#W190 File "C:\WINDOWS\system32\SET20E.tmp" marked to be moved to
"C:\WINDOWS\system32\wininet.dll" on next reboot.

is after the error and,

#-336 Copying file "e:\c43c53eba564a81d8aa2af6364\url.dll" to
"C:\WINDOWS\system32\url.dll" via temporary file
"C:\WINDOWS\system32\SET84.tmp".
#W190 File "C:\WINDOWS\system32\SET84.tmp" marked to be moved to
"C:\WINDOWS\system32\url.dll" on next reboot.
#-336 Copying file "e:\c43c53eba564a81d8aa2af6364\urlmon.dll" to
"C:\WINDOWS\system32\urlmon.dll" via temporary file
"C:\WINDOWS\system32\SET85.tmp".
#W190 File "C:\WINDOWS\system32\SET85.tmp" marked to be moved to
"C:\WINDOWS\system32\urlmon.dll" on next reboot.
#-336 Copying file "e:\c43c53eba564a81d8aa2af6364\vbscript.dll" to
"C:\WINDOWS\system32\vbscript.dll" via temporary file
"C:\WINDOWS\system32\SET86.tmp".
#W190 File "C:\WINDOWS\system32\SET86.tmp" marked to be moved to
"C:\WINDOWS\system32\vbscript.dll" on next reboot.
#-336 Copying file "e:\c43c53eba564a81d8aa2af6364\webcheck.dll" to
"C:\WINDOWS\system32\webcheck.dll" via temporary file
"C:\WINDOWS\system32\SET87.tmp".
#W190 File "C:\WINDOWS\system32\SET87.tmp" marked to be moved to
"C:\WINDOWS\system32\webcheck.dll" on next reboot.
#-336 Copying file "e:\c43c53eba564a81d8aa2af6364\wininet.dll" to
"C:\WINDOWS\system32\wininet.dll" via temporary file
"C:\WINDOWS\system32\SET89.tmp".
#W190 File "C:\WINDOWS\system32\SET89.tmp" marked to be moved to
"C:\WINDOWS\system32\wininet.dll" on next reboot.
[2007/02/23 21:21:39 3308.2]

is before it. Note that the error repeats it self multiple times so the
stuff after is after the last error and the stuff before is before like
ten
errors.

Keep trying, you seem to know what you're doing

"zachd [MSFT]" wrote:


There should be extra data in that file right around there that should
actually name the registry keys in question -- what are the next ten
lines
before and after those errors?

--
Speaking for myself only.
See http://zachd.com/pss/pss.html for some helpful WMP info.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--

"Bryan" <Bryan@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:4C4517AC-BEF6-4F62-8F96-278E8EE99044@xxxxxxxxxxxxxxxx
Not sure what the error is, but I do know that these lines repeat
themselves
over and over again. Here they are:

#E008 Setting registry value HKCR\WMP.Device
#E033 Error 5: Access is denied.
#E065 Parsing AddReg section [V9Reg.Univ] in
"e:\ef54aec6785e8fe0fc85d52c7cf64440\update\update.inf" failed.
Error
5:
Access is denied.
#E064 Parsing install section
[ProductInstall.GlobalRegistryChanges.Install]
in "e:\ef54aec6785e8fe0fc85d52c7cf64440\update\update.inf" failed.
Error
5:
Access is denied.

What should I do?

"zachd [MSFT]" wrote:


You would need to look at the bottom of c:\windows\updspapi.log .
That
should tell you what registry key modification resulted in "Access
is
denied". You would need then to give access to that registry
key...
or
at
least rename it for the duration of WMP's install. Look for "Error
5"
in
the updspapi.log.

What's that error?

--
Speaking for myself only.
See http://zachd.com/pss/pss.html for some helpful WMP info.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--

"Bryan" <Bryan@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:355095BD-1667-438C-83AC-21126F890397@xxxxxxxxxxxxxxxx
Well, I get ERROR:0x80070005 and i tried everything on the link
you
posted.
Nothing worked> I tried Deleteing, Renaming, Granting Access,
everything
and
the same message popped up after installation.
Anyway, If you have any other ideas, please post them up, I'm
desperate
for
WMP11.

Cheers, Bryan

"zachd [MSFT]" wrote:


In the file c:\windows\wmsetup.log , what lines contain
"ERROR:"?
http://zachd.com/pss/pss.html#setup11
should be a helpful guide.

--
Speaking for myself only.
See http://zachd.com/pss/pss.html for some helpful WMP info.
This posting is provided "AS IS" with no warranties, and confers
no
rights.
--
"Bryan" <Bryan@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:22FEDD77-25E0-410D-A65E-9F8803EE79B7@xxxxxxxxxxxxxxxx
Well, I downloaded the WMP 11 setup, and i run the installer.
when
it
is
finished installing, it says "It was not possible to complete
Setup.
For
more
assistance, click Web Help." This page has nothing
informative.
It
also
says,
"It was not possible to complete Setup; Windows Media Player
11
was
not
installed. Restart Windows and then run Windows Media Player
Setup
again."
This does not work. When I click on Web Help, The error code
is
C00D2AFB.
How
can I properly install WMP 11? Please help!














.

Relevant Pages

  • Re: WMP 11 installation troubles
    ... See http://zachd.com/pss/pss.html for some helpful WMP info. ... "C:\WINDOWS\system32\iertutil.dll" on next reboot. ... least rename it for the duration of WMP's install. ...
    (microsoft.public.windowsmedia.player)
  • Re: C00D2AFB ERROR CODE
    ... Change the permissions of this registry key so that you can write to it and you should be fine. ... "C:\WINDOWS\system32\wmvcore.dll" on next reboot. ...
    (microsoft.public.windowsmedia.player)
  • Re: WMP 11 without reboot?
    ... the registry to see what a reboot was required. ... You had to reboot because files were in use. ... See http://zachd.com/pss/pss.html for some helpful WMP info. ... installations of simple applications. ...
    (microsoft.public.multimedia.windows.mediaplayer)
  • RE: FTPD and Telnet password lost when ethernet cable detached
    ... credentials also if they are saved into the hive registry. ... You might check, then, calling GetCurrentUserExin both cases, network ... and FTP works fine and I never lost password after reboot also with cable ... RemoteAdmin interface use different password to login than ftp and telnet? ...
    (microsoft.public.windowsce.platbuilder)
  • RE: FTPD and Telnet password lost when ethernet cable detached
    ... credentials also if they are saved into the hive registry. ... You might check, then, calling GetCurrentUserExin both cases, network ... and FTP works fine and I never lost password after reboot also with cable ... RemoteAdmin interface use different password to login than ftp and telnet? ...
    (microsoft.public.windowsce.platbuilder)