Re: How to open router firewall to broadcast with WMEncoder
- From: "Mike Lowery" <selfspam@xxxxxxxxxxxxxxxx>
- Date: Tue, 21 Aug 2007 07:24:36 -0700
Only open the port you configured in WME for streaming. Your Internet clients
will use http://enc:port to watch/hear the stream where "enc" is your encoder's
DNS name or Internet IP address and "port" is the one mentioned previously.
"Marcelo Oliveira" <marcel@xxxxxxxxxxxxx> wrote in message
news:ebxnql04HHA.4880@xxxxxxxxxxxxxxxxxxxxxxx
I want to use Window Media Encoder 9 to stream live video.
I want to broadcast pulling form the encoder without using Windows Media
Server.
I use a ADSL connection with a modem and router in the same equipment (NTT SV3
modem in Japan).
My problem is configuring the ports, so I have a few questions:
- do I have to open only port TCP 8080 ? or I must also open
in: TCP 80, 554, 1755
in: UDP 1755, 5005
out: UDP 1024-5000, 5004
I'm also confused about which configuration in my modem-router should be used:
The modem is in Japanese so I translated 3 configuration pages that I think
will be used.
Can someone give a suggestion on how to enable somebody in the Internet to see
my broadcast ? [typing in the browser "mms://MyInternetAddress" (given by
WME)]
Thanks in advance for your help ............... Marcelo ............
- Packet filter configuration:
entry n#
priority
applying interface
transmission origin IP address/mask
Address destination IP/mask
protocol
transmission origin port n#
destination port n#
filter action (let pass/don't let pass)
- address conversion (port designation) configuration:
entry n#
priority
Applying connection
LAN side IP address
ADSL side IP address
protocol
port #
- address port conversion configuration:
entry n#
priority
Applying connection
LAN side IP address
ADSL side IP address
protocol
LAN side port #
ADSL side port #
.
- References:
- How to open router firewall to broadcast with WMEncoder
- From: Marcelo Oliveira
- How to open router firewall to broadcast with WMEncoder
- Prev by Date: Re: Media Encoder used to convert MOV to WMV?
- Next by Date: Re: Quad-core how much faster?
- Previous by thread: How to open router firewall to broadcast with WMEncoder
- Next by thread: Re: Quad-core how much faster?
- Index(es):
Relevant Pages
|
