Switching with Fades and Effects

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Is there a plug in to allow for fades and other effects when switching
sources in WME?

Or is there another way to do this without an external hardware video
switch?

Thanks

.

Relevant Pages

  • Re: D-70 with CR-2s
    ... you do have a charger ... appropriate plug on the end for were you are. ... It is easy to do with modern switching ... for higher power levels, dual primaries, and switching to connect the ...
    (rec.photo.digital.slr-systems)
  • iMac switching off
    ... My G5 iMac - a very early one - has recently started randomly powering ... Not shutting down, just switching off as if the plug had been ...
    (uk.comp.sys.mac)
  • Re: Why the wide prong on a plug?
    ... The wide terminal is the neutral, and it ensures you are switching ... While you may have grown up with the old two prong plugs, ... If it pisses you off to only be able to insert the plug into a socket one ... appreciate the extra safety measures. ...
    (alt.home.repair)
  • Re: Tifton, GA
    ... standard with a 30 amp plug. ... switching won't allow it. ... i cheated a bit on mine, rear ac, instead of to the switch, ran a separate cord only for it, could plug it in to a 15/20 amp outlet at the site, or an ac socket in the gen compartment, by extension cord into my house, or if the front ac was off, a plug inside the mh. ...
    (rec.outdoors.rv-travel)
  • Re: Tech: Defenders 1st two LEDs are blinking, other two staying solid.
    ... You also have to adjust the voltage on your switching PS for the boards ... plug, and plug his harness into it, which the other end goes to the ... is for the monitor, and the splice from the 110 line to the new ps. ... spare ROM board that has the same result, so I'm hoping it's not two ...
    (rec.games.video.arcade.collecting)