RE: I hope someone knowledgeable responds



Thanks for your request -- but to date there are more questions/less answers.
If I plug my cable from the tuner card into MIC (instead of Line In) I get
full volume but still have the problems with left/right channels not working
right. So this is what I do ONLY for encoding and streaming TV to my laptop
or PPC where stereo sound isn't important. Other files as wme input work
fine (but obviously they are not using the same audio in).

"Wireless Tech Radio" wrote:

> I hope someone knowledgeable responds as it sounds very similar to my issue.
> Not many responses here on these low sound level questions.
> Jim
>
> "benkc" wrote:
> 8 out of ten
> > times the sound is minimal on the display and receiving pc or ppc eventhough
> > the recording line-in level is maxed. Rarely I open the same saved encoding
> > session (audio SB Live/video ATI tuner) and whoa, sound is at yellow or red
> > level.
> > TIA
.



Relevant Pages

  • Re: No Audio on Live Television
    ... sound from this computer? ... we're talking about audio *in* from a Comcast STB. ... >> connected the RCA jacks to the STB and a 1/4" jack to the tv tuner card. ...
    (microsoft.public.windows.mediacenter)
  • Re: No Audio on Live Television
    ... we're talking about audio *in* from a Comcast STB. ... connected the RCA jacks to the STB and a 1/4" jack to the tv tuner card. ... However, no sound. ...
    (microsoft.public.windows.mediacenter)
  • Re: Media Center 2005 no sound
    ... The audio out should be through your sound card, not the tuner card. ... Jason Tsang - Microsoft MVP ...
    (microsoft.public.windows.mediacenter)
  • Re: Possible to NEVER get loss of signal with Live TV???
    ... I assume you've updated the drivers for your tv tuner card? ... Jason Tsang - Microsoft MVP ... Sound Card Sound Blaster® Live! ... Speakers Dell 5650 5.1 Surround Sound Speaker System with Subwoofer ...
    (microsoft.public.windows.mediacenter)
  • Re: No sound while watching live TV
    ... or cable wall outlet that is connected directly to your TV Tuner card. ... In either case of the above cases the sound output is from your onboard ... >I m using a dvi cable from my video card to the TV I have an S-video ... >>> as video's with no trouble, I have a direct cable connection to the MCE ...
    (microsoft.public.windows.mediacenter)