On Sun, 07 Jan 2007 14:00:31 -0800, georgevp <georgevp40@xxxxxxxxxxx>
wrote:
My machine: ibook/g4/1ghz/768mb/30hd
When I put a 2.0 usb in it states that it's in a 1.1 usb hub and tells me
that it need an upgrade. Both usb's on my ibook allow 1.1 and 2.0 usb. I'm
not sure haw I would upgrade it ether.
G
VPC only emulates a USB 1.1 port. This is all a VM will have,
regardless of what the Mac has.
There is no upgrade for VPC for USB 2.0 support.
--
Cheers,
Steve Jain, Virtual Machine MVP http://vpc.essjae.com/
I do not work for Microsoft.
.
Re: DAMN YOU, GOOGLE! ... My 2MB ram was a factory upgrade -- standard for it was 1MB. ... Generic 7-in-1 USB card reader (internal)...John Turco... (rec.photo.digital)
BERNINA news, was Re: Should I change my Bernina??? ... The thing that really puzzles me about the USB upgrade is that it should only be a software upgrade. ... I could have misheard her and it could be the other way around -- that you have to get the USB upgrade if you get the BSR upgrade.... The only way to use CDs is to connect the 730 to your computer and transfer them to the sewing machine, and the only way to use design cards is to connect the 730 to a laptop with a PCMCIA slot and transfer them to the sewing machine. ... (rec.crafts.textiles.quilting)
2.6.20 USB issue(?) [disabled by hub(EMI?)] ... One thing I did recently was upgrade to a newer Intel Motherboard BIOS but this is also the first time I have run 2.6.20-rc7 for this long as well. ...usb 6-2: new low speed USB device using uhci_hcd and address 3 ...Reading package lists......avahi-daemon libavahi-core4 libdaemon0... (Linux-Kernel)
2.6.20-rc7 USB issue(?) [disabled by hub(EMI?)] ... One thing I did recently was upgrade to a newer Intel Motherboard BIOS but this is also the first time I have run 2.6.20-rc7 for this long as well. ...usb 6-2: new low speed USB device using uhci_hcd and address 3 ...Reading package lists......avahi-daemon libavahi-core4 libdaemon0... (Linux-Kernel)
Re: (Re)load Xfree modules after startup ... It's time to upgrade to Xorg, ... > I plug the tablet in the Linux system, it doesn't work until I restart ... I could test this out by plugging my Wacom in to my laptop... /dev/input/mice in my xorg.conf, and a USB mouse. ... (comp.os.linux.x)
