Re: Virtual PC 7 installation with 10.4.5

Thank you Mr. Power for your suggestion. I rebooted with the Shift key held
down until the login screen appeared with "Safe Boot" in red. I repeated the
installation with the Shift key held down through each reboot. I got as far
as the screen appeared with the three options for loading Windows. That that
point the message "You must be logged in as an administrator to complete the
Virtual PC installation" appeared.

I have instructions for logging on as a "Root User", if you think that might
help. Unfortunately, I have not used UNIX/Linux about two decades and would
prefer to try other options first.

Any other ideas?

Thank you very much for your help.

Michele

On 2/27/06 12:13 PM, in article
1141071200.565474.34520@xxxxxxxxxxxxxxxxxxxxxxxxxxxx, "Paul Power"
<paulkpower@xxxxxxxxx> wrote:

try restarting the Mac OS in Safe Boot and install from there


.

Relevant Pages

  • Re: WDS + WPA + RADIUS problem
    ... dive into the router from a telnet or SSH session ... command line or menu driven reboot. ... range of power supply voltages. ... but haven't spoken to client this morning to ascertain). ...
    (alt.internet.wireless)
  • [SUMMARY] Sunfire v880 reboot
    ... are the responses to my post regarding: Sunfire v880 reboot ... I should have mentioned in my original post that this system has been ... take a look in the RSC buffer logs for whatever ... >if your ups has a glitch, you have a power event. ...
    (SunManagers)
  • Re: Samsung ML-2010
    ... it on after the computer has been turned on, it draws so much ... I took it off the power strip. ... plugs, the ... No problem with the computer - it didn't reboot. ...
    (comp.periphs.printers)
  • Re: Samsung ML-2010
    ... turn it on after the computer has been turned on, it draws so ... much current that it causes the computer to reboot. ... I took it off the power strip. ... contacts on the plugs, or maybe even inside the wall going up to ...
    (comp.periphs.printers)
  • Re: problem with a net printer
    ... Yes, I can solve the electrical power, but I can´t solve the software problem. ... Always I reboot XP laptop where is connected the printer, ... If I wan´t print from Millenium computer I must reboot this computer. ...
    (microsoft.public.windowsxp.network_web)