Re: Transcriber usb foot pedal

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

If it's coming up with the message 'You need to select a valid port for
the foot pedal', as you state, then it would seem that it DOES
recognize it. Otherwise, how would it know it was a foot pedal? I
believe that it may be asking you to attach it to a port. In that case,
go to PC/PC Settings and attach it to COM1 port. See if that helps

.

Relevant Pages

  • Re: patch for sysfs in the cyclades driver
    ... If I can attach this data to the port, ... > will have to test it (I'm grateful for you, Scott). ... send the line "unsubscribe linux-kernel" in ...
    (Linux-Kernel)
  • Re: Printer driver problem in a mixed OS environment (XP and NT)
    ... Ok, you are right, I can attach the debugger on the XP side to the spooler. ... But where to attach on the NT side to find the 'missing port' problem? ... >> I have developed a kernel mode printer driver which works ...
    (microsoft.public.development.device.drivers)
  • Re: HEADSUP: uath(4) has been committed.
    ... I have a uath device the Engenius NUB-362-EXT, it will not attach to ... port 1 powered ... Atheros Communications Inc, rev 0.01, iSerialNumber 1.0 ...
    (freebsd-current)
  • Re: Snow Leopard and HP 5MP printer?
    ... a fair number of print servers designed to attach to printers via a parallel ... port; you don't have to limit yourself to HP. ... "Windows printing" from the Mac as a means to print. ...
    (comp.sys.mac.system)
  • Question on moving files with File Manager.....
    ... I saw an old news group posting about a way to move a file that one has ... Here's how I attach a library: ... Download the library to the calculator. ... Press the corresponding number key of the port you want the library ...
    (comp.sys.hp48)