Object Palette crashes Word for Mac 2008



Version: 2008
Operating System: Mac OS X 10.4 (Tiger)
Processor: Power PC

When I try to "click the camera" Word crashes (everytime)? Any help out there?
.



Relevant Pages

  • Re: Hopefully simple question about DC power supplies
    ... a technical ignoramus, I know very little about power or cabling, so I ... should output 12V at up-to 500mA via a suitably-sized DC power jack ... 'rechargeable laptop battery pack'. ... 'charging' input), 'Device B' is a small CCD camera, which takes 12V. ...
    (sci.electronics.basics)
  • Re: Switching transistor question
    ... switch the FET on. ... using a servo to pan the camera and passive IR to trigger action. ... As for the idea of ramping up the power to the processor inside the ... really should be able to apply DC at any voltage and no have the chip ...
    (sci.electronics.design)
  • Re: Switching transistor question
    ... switch the FET on. ... using a servo to pan the camera and passive IR to trigger action. ... camera is turning the camera on when batteries are inserted - That way ... As for the idea of ramping up the power to the processor inside the ...
    (sci.electronics.design)
  • Re: Sony DMX-P01 mixer & Zaxcom
    ... Have you tried filtering the power supply leads to the Zaxcom with either capacitors, ... AFAIK, there is no supplied camera snake supplied with the machine, just the male plug that attaches to the mixer. ... Seems the only solution is to filter the power through a DC to DC convertor,, and hope that fixes the problem. ...
    (rec.arts.movies.production.sound)
  • Re: Zaxcom Stereoline
    ... some mixers which cant share the same power). ... Regular Zaxcom camera link users, ... Since I mostly power the RX & TX externally I tape the doors so ...
    (rec.arts.movies.production.sound)

Loading