Re: Notification Sounds OFF (FIXED!)

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

It is really fixed. The problem was the Sound preference panel was set
to Output via the USB port rather than the internal speakers. I have no
idea how it was changed but if you lose the sound check the System
Preferences - Sound panel.

aRKay
----------------
May have solved the problem by messing with the Sound control panel in
System Preferences. Some dummy (me) had the Output set to the USB port
rather than the Internal Speakers. Seems to be working okay now!

I was just about to reinstall the Tiger.

aRKay
May have solved the problem by messing with the Sound control panel in
System Preferences. Some dummy (me) had the Output set to the USB port
rather than the Internal Speakers. Seems to be working okay now!

I was just about to reinstall the Tiger.

aRKay


In article
<REMOVEarkay-D6228A.10185324052005@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>,
aRKay <REMOVEarkay@xxxxxxx> wrote:

> In article
> <REMOVEarkay-37F1AD.07255324052005@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>,
> aRKay <REMOVEarkay@xxxxxxx> wrote:
>
> > I am not sure what happened or what I did wrong but Entourage 2004 is
> > now running silent under 10.4.1. I went to the Ent Preferences and
> > things seem to be checked correct. Then double checked the System
> > Preference/Sound panel and it it looks normal. I even did a restart and
> > Entourage only is still muted. Other application alerts seem to be
> > working.
> >
> > Any suggestions on how to get the alerts back?
> >
> > aRKay
>
> This really has me stumped. I rebooted from a backup hard drive and the
> Entourage sound alerts work. While booted from another drive, I ran the
> 10.4 Disk Utility Disc First Air on the primary drive. I then restarted
> and zapped the pram a few times. Before doing all of this I used the
> repair permissions on the primary drive.
>
> Where are the alert prefs for Ent stored? I may try a swop of the
> appropriate MS file from the backup hard drive (that works) to see if I
> can get the MS sounds to work again.
>
> Any suggestions will be appreciated. You don't miss the alerts until
> they are muted!
.

Relevant Pages

  • Re: Laptop volume control screw-up
    ... Right click on the sound icon, next to the hour/date panel. ... Choose "Preferences", and select your sound card device. ... inadvertently fouled up the laptop volume control - how I do not know. ...
    (Ubuntu)
  • Re: Regarding DIY Cabs
    ... making speaker cabs out of 1/2" plywood and using ... A box of the dimensions this cabinet will have will not have ... in the way of sound quality IMHO. ... cone, bounce off the back panel, then travel back through the ...
    (alt.guitar.bass)
  • Re: Realtek Audio : have lost my stereo sound; quad, 5:1&7:1 still ok ... driver prob ? HELP!
    ... <<<In Control Panel, Sounds and Audio Devices, go to the Audio tab. ... MY SETUP HAS a 'SOUND' Dbox ... the driver for your sound card has molested the standard Control Panel ...
    (uk.comp.homebuilt)
  • Re: Starting Win2000 and speaker noise starts also!
    ... I am not REAL clear on your understanding of the sound level control ... One is because I pump feeds through a mixer panel and the panel, ... puts enough noise into the system to be ... and go inside to remove and re-connect sound wires there (e.g. from CD ...
    (microsoft.public.win2000.general)
  • Re: The value of RMCR was: The Future of RMCR
    ... Email assertions of preferences. ... Since one aspect of the group is to discuss recordings and recording ... sound is still acceptable. ... so the downloads have been great. ...
    (rec.music.classical.recordings)