Re: Wired 802.1x with IAS & HP 2650 switches = error 16

email me offline and we can have a discussion. I actually have one issue
that maybe you could help me with. I think we can get your situation working
as I'm pretty sure we have the same config using the procurve switches and
IAS. Email - brian_scheible@xxxxxxxxx

"Ray" wrote:

Thanks, Brian. We have not. In fact, last week we started looking at other
alternatives but they're in the big bucks range. Anything you can help with
would be greatly appreciated.

Ray

"Brian S" <BrianS@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:E8E2E245-2EBD-4A2B-99A3-E5F9CDBB8043@xxxxxxxxxxxxxxxx
This is probably a little late of a reply but I just saw this and wanted
to
see if you solved the problem? I have the same setup (sort of) and on the
procurve I use the unauth-vid switch for the ports enabled with RADIUS.
That
way the switch places them into a segregated VLAN when they do not
authenticate with the RADIUS server. If you need more information please
feel free to respond.

"Ray" wrote:

We're trying to set up a test for guest usage to provide Internet access.
The computers will not be a part of our domain, so we have to use Windows
domain credentials, which is actually a good thing since we can turn the
accounts on and off.

The switch is an HP 2650 with the current firmware (downloaded and
installed
yesterday). We're trying to authenticate to a Windows 2003 SP1 Server IAS
installation running on an ISA 2004 server. We already use this IAS
server
for other purposes and it works flawlessly.

When the non-company XP SP2 laptop is fired up, we get the bubble to
click
on to enter credentials, but the credentials are not accepted. The IAS
log
shows the correct domain\user name but gives an error 16 and says the
user
name or password is incorrect.

The switch has EAP and CHAP. Win XP has EAP, sub options of MD5, PEAP, or
cert.

No combination of authentication method we try works. If anyone has done
this (successfully), hints would be appreciated.

Thanks,

Ray






.

Relevant Pages

  • Wired 802.1x with IAS & HP 2650 switches = error 16
    ... We're trying to authenticate to a Windows 2003 SP1 Server IAS ... on to enter credentials, but the credentials are not accepted. ... The switch has EAP and CHAP. ...
    (microsoft.public.internet.radius)
  • Domain not available on PEAP clients at first logon
    ... I'm currently testing ethernet (switch, no wireless) authentication using ... credentials on the local machine cannot get authenticated through the switch ... Windows 2003 IAS server residing on a member server. ...
    (microsoft.public.internet.radius)
  • Re: Wired 802.1x with IAS & HP 2650 switches = error 16
    ... procurve I use the unauth-vid switch for the ports enabled with RADIUS. ... We're trying to authenticate to a Windows 2003 SP1 Server IAS ... on to enter credentials, but the credentials are not accepted. ...
    (microsoft.public.internet.radius)
  • Re: Catalyst 3550 and IAS authorization
    ... can you reliably authenticate to the IAS ... Users on that switch are in VLAN2. ...
    (comp.dcom.sys.cisco)
  • Re: ConnectComputer Problem
    ... I'm a little confused by your network configuration. ... Switch2 --- SBS Server ... switch has internet access all the time, the second switch has the client ... NICs ...
    (microsoft.public.windows.server.sbs)
Loading