Re: Choose IP address to run IAS on

"Eliot Gable" <support8@xxxxxxxxxxxxxx> wrote in
news:U7mdncALNcjsqgnenZ2dnUVZ_tOdnZ2d@xxxxxxxxxxx:

> Go to the IAS server properties and enter the IP address followed by a
> colon (:) and then the port numbers for the ports to listen on. Then
> restart IAS.
>
> "Nathan" <nathan@123> wrote in message
> news:%23W6dXoV%23FHA.1484@xxxxxxxxxxxxxxxxxxxxxxx
>> Hi,
>>
>> We have 1 x NIC but 2 x IP addresses allocated on a Windows 2003
>> server. How can I get IAS to use the address of my choice? Not the
>> one it wants to use?
>>
>> Thanks
>>
>> Nathan
>>
>
>
>

Just FYI, this information is covered in the Help topic "Configure IAS port
information" on the box or at
http://www.microsoft.com/technet/prodtechnol/windowsserver2003/library/Serv
erHelp/cd8b2cb5-9bbd-4e93-8d98-faf5f6f9957c.mspx

--
James McIllece, Microsoft

Please do not send email directly to this alias. This is my online account
name for newsgroup participation only.

This posting is provided "AS IS" with no warranties, and confers no rights.
.

Relevant Pages

  • Re: ipsec failing on boot and server in block mode
    ... a port conflict will occur if the DNS server allocates a port that is ... IAS but there may be other services that will have a conflict. ... If the IPSEC service fails to start, the server will be running in Block ...
    (microsoft.public.windows.server.sbs)
  • Re: IAS - Ports problem
    ... It's going to be hard to detect this using a port scan or telnet because IAS ... Register Server in Active Directory) ... I have configured RADIUS clients and Remote access policy in the IAS ...
    (microsoft.public.windows.server.networking)
  • Re: Choose IP address to run IAS on
    ... >> colon and then the port numbers for the ports to listen on. ... >> restart IAS. ... >>> Nathan ...
    (microsoft.public.internet.radius)
  • Re: IAS - Ports problem
    ... The IAS is supposed to answer on port 1812 and 1645, but when I telnet to these ports from a wks there is no respond. ... Try running a port scanner to verify that those ports are open, or use netstat on the server to see if that shows a listening port. ... Not all servers will respond to a telnet request, so this isn't necessarily an accurate way to determine that a port is open and the sever is responding. ...
    (microsoft.public.windows.server.networking)
  • Re: Choose IP address to run IAS on
    ... Go to the IAS server properties and enter the IP address followed by a colon ... and then the port numbers for the ports to listen on. ... Then restart IAS. ...
    (microsoft.public.internet.radius)
Loading