Re: ReasonCode=97 with netgear and intel
From: Sam Salhi [MSFT] (samers_at_online.microsoft.com)
Date: 11/28/04
- Previous message: Sam Salhi [MSFT]: "Re: IAS, Cisco AP's and VLAN'S"
- In reply to: Ralf Laemmermeyer: "Re: ReasonCode=97 with netgear and intel"
- Messages sorted by: [ date ] [ thread ]
Date: Sun, 28 Nov 2004 14:54:01 -0800
Good job
I didn't know that you were using a different supplicant
--
=============================================
This posting is provided "AS IS" with no warranties, and confers no rights
Join us on Nov 29th 1:00 to 2:00 PM PST, for an online webchat on "Using and
troubleshooting RADIUS using IAS"
This chat will help you resolve all of your RADIUS/IAS issues. You can ask
about RADIUS, IAS, 802.1x, Active directory configuration and Certificate
services, related to IAS and RADIUS
Follow this link to join the chat
http://www.microsoft.com/communities/chats/default.mspx#04_Nov29_IAS_RADIUS
=============================================
"Ralf Laemmermeyer" <rlaemmermeyer@sram.com> wrote in message
news:uaYmRK90EHA.3452@TK2MSFTNGP14.phx.gbl...
> Unfortunately it didn't help .. but I can solve the problem with the intel
> 2100 and 2200 cards through removing the client utility and installing
> XPSP2.
>
> regards
>
> Ralf
>
> "Ralf Laemmermeyer" <rlaemmermeyer@sram.com> schrieb im Newsbeitrag
> news:%23HcfOlt0EHA.2040@tk2msftngp13.phx.gbl...
>> Thanks a lot for this information, I will try it.
>>
>> regards
>>
>> Ralf
>>
>> "Sam Salhi [MSFT]" <samers@online.microsoft.com> schrieb im Newsbeitrag
>> news:OTvEufk0EHA.480@TK2MSFTNGP10.phx.gbl...
>>> Try to obtain the latest firmware for the access points. I recall that
>>> Cisco had a bug in these and 802.1x wired switches, there was supposed
>>> to be a fix in October
>>>
>>> --
>>> =============================================
>>> This posting is provided "AS IS" with no warranties, and confers no
>>> rights
>>>
>>> Join us on Nov 29th 1:00 to 2:00 PM PST, for an online webchat on "Using
>>> and troubleshooting RADIUS using IAS"
>>> This chat will help you resolve all of your RADIUS/IAS issues. You can
>>> ask about RADIUS, IAS, 802.1x, Active directory configuration and
>>> Certificate services, related to IAS and RADIUS
>>> Follow this link to join the chat
>>> http://www.microsoft.com/communities/chats/default.mspx#04_Nov29_IAS_RADIUS
>>> =============================================
>>>
>>> "Ralf Laemmermeyer" <rlaemmermeyer@sram.com> wrote in message
>>> news:%23OVgdsW0EHA.2824@TK2MSFTNGP09.phx.gbl...
>>>> We are using the following hardware/software:
>>>>
>>>> -Cisco 1200 series (1231G) AP
>>>> -Cisco 1100 series (1121) AP's
>>>> -Windows 2000 server standard with IAS loaded
>>>> -Users are running windows 2k sp4, windows xp sp2 and windows xp sp1
>>>> with the wpa patch.
>>>> -Notebooks are from HP/Compaq and Dell
>>>>
>>>> the most notebooks works very well except machines with the Intel
>>>> PRO/Wireless 2100B built in card and the netgear wag511
>>>>
>>>> first i get succesfull authentication for the machine and the user
>>>>
>>>> User DDuck was granted access.
>>>> Fully-Qualified-User-Name = DOMAIN\DDuck
>>>> NAS-IP-Address = 10.6.11.97
>>>> NAS-Identifier = AP-GerWLAN-KR
>>>> Client-Friendly-Name = GerWLAN-KR
>>>> Client-IP-Address = 10.6.11.97
>>>> NAS-Port-Type = 19
>>>> NAS-Port = 311
>>>> Policy-Name = WirelessUsers
>>>> Authentication-Type = EAP
>>>> EAP-Type = Protected EAP (PEAP)
>>>>
>>>> User host/PC2522.domain.com was granted access.
>>>> Fully-Qualified-User-Name = DOMAIN\PC2522$
>>>> NAS-IP-Address = 10.6.11.97
>>>> NAS-Identifier = AP-GerWLAN-KR
>>>> Client-Friendly-Name = GerWLAN-KR
>>>> Client-IP-Address = 10.6.11.97
>>>> NAS-Port-Type = 19
>>>> NAS-Port = 309
>>>> Policy-Name = WirelessComputerAccess
>>>> Authentication-Type = EAP
>>>> EAP-Type = Protected EAP (PEAP)
>>>>
>>>> .. after a 0,5 minute i get during a time period of 1,5 minute 6 times
>>>> the following error message
>>>>
>>>> Access request for user DDuck was discarded.
>>>> Fully-Qualified-User-Name = <undetermined>
>>>> NAS-IP-Address = 10.6.11.97
>>>> NAS-Identifier = AP-GerWLAN-KR
>>>> Called-Station-Identifier = 000f.908b.7af0
>>>> Calling-Station-Identifier = 000f.b50c.e690
>>>> Client-Friendly-Name = GerWLAN-KR
>>>> Client-IP-Address = 10.6.11.97
>>>> NAS-Port-Type = 19
>>>> NAS-Port = 415
>>>> Reason-Code = 97
>>>> Reason = The authentication request was dropped because it contained an
>>>> unexpected packet.
>>>>
>>>> then the procedure starts from beginning access no access ....
>>>> sometimes i get additionally the error message:
>>>>
>>>> Access request for user DOMAIN\DDuck was discarded.
>>>> Fully-Qualified-User-Name = <undetermined>
>>>> NAS-IP-Address = 10.6.11.97
>>>> NAS-Identifier = AP-GerWLAN-KR
>>>> Called-Station-Identifier = 000f.8f23.c8d0
>>>> Calling-Station-Identifier = 000f.b50c.e690
>>>> Client-Friendly-Name = GerWLAN-KR
>>>> Client-IP-Address = 10.6.11.97
>>>> NAS-Port-Type = 19
>>>> NAS-Port = 312
>>>> Reason-Code = 1
>>>> Reason = An internal error occurred. Check the event log for additional
>>>> information on what might have caused this error.
>>>>
>>>> on two machines with intel cards i was able to fix that through
>>>> removing the client utility install the newest driver and xpsp2
>>>> but is that behaviour only caused by the clients? on w2k machines i
>>>> need the client utility!
>>>>
>>>> thanks in advance
>>>>
>>>> Ralf
>>>>
>>>
>>>
>>
>>
>
>
- Previous message: Sam Salhi [MSFT]: "Re: IAS, Cisco AP's and VLAN'S"
- In reply to: Ralf Laemmermeyer: "Re: ReasonCode=97 with netgear and intel"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
