Re: Wireless 802.11x PEAP failure IAS Cicso 1200

Tech-Archive recommends: Speed Up your PC by fixing your registry

From: Agent News Reader (n.wave_at_ntlworld.com)
Date: 08/05/04

  • Next message: Agent News Reader: "Re: how to configure and install" 
    Date: Thu, 05 Aug 2004 19:47:38 GMT

    I found IAS a real pain in the behind - in the end went with Odyssey
    Server and Client - install was a breeze and with GINA - users are
    able to login Novell prior to the desktop showing - a;lll very easy
    and straight forward

    On Wed, 04 Aug 2004 14:14:49 -0700, "James McIllece [MS]"
    <jamesmci@online.microsoft.com> wrote:

    >murf1988@yahoo.com (Chris) wrote in
    >news:2bcf8c97.0407220701.cf4c3e2@posting.google.com:
    >
    >> I am trying to use IAS (Windows 2003 server) with a Cisco 1200 AP [IOS
    >> Ver 12.2(13)JA1] to implement PEAP.
    >> I have obtained a test certificate from Verisign and installed on the
    >> IAS server. I have also installed the Test Root CA from Verisign on
    >> the client workstation (W2ksp4).
    >>
    >> I get the unknown user or password error in the event log when the
    >> user tries to authenticate.
    >>
    >> The following is an excerpt from the RASTLS.LOG
    >> The date and time on the AP, client, and server are all within 2
    >> minutes of each other.
    >>
    >> Any help would be appreciated.
    >>
    >>snip<
    >
    >Hi Chris --
    >
    >I am not familiar with the verisign test cert -- you may want to review the
    >whitepaper "Obtaining and Installing a VeriSign WLAN Server Certificate for
    >PEAP-MS-CHAP v2 Wireless Authentication" at
    >http://www.microsoft.com/downloads/details.aspx?FamilyID=1971d43c-d2d9-
    >408d-bd97-139afc60996b&DisplayLang=en.
    >
    >This whitepaper has been updated recently.
    >
    >Also you may want to verify that the Verisign test cert meets the minimum
    >server certificate requirements found in "Network access authentication
    >and certificates" in Windows Server 2003 IAS or VPN Help, or on the web at
    >http://www.microsoft.com/resources/documentation/WindowsServ/2003/standard/
    >proddocs/en-
    >us/Default.asp?url=/resources/documentation/WindowsServ/2003/standard/prodd
    >ocs/en-us/sag_VPN_und15.asp

  • Next message: Agent News Reader: "Re: how to configure and install"

    Relevant Pages

    • Aironet 1200/MS Radius Help - Yet Again
      ... Your collective help thus far has made me understand more about wireless ... RADIUS/IAS Server. ... I also got a certificate from verisign to install on one of the two IAS ... there are communications between the client and access ...
      (microsoft.public.internet.radius)
    • Re: Fax on Terminal Server from SBS2K3
      ... please make sure the Fax service is installed on the TS server. ... you can try the steps below to install Shared Fax Client: ... 248340 Installing and Using Programs in Windows 2000 Terminal Services ...
      (microsoft.public.windows.server.sbs)
    • RE: Fax monitor incoming + outgoing calls?
      ... The detail steps to install share fax client as follows: ... Start server management console, locate Client Computers node, click ... To the folder redirection GPO issue: ... How to stop Folder Redirection in Windows Server 2003 and in Windows 2000 ...
      (microsoft.public.windows.server.sbs)
    • RE: No Client or Server Desktop Access Through RWW SBS 2003 SP2
      ... The SBS server is running SP2. ... However I don't know if the client computers do. ... To successfully install SBS 2003 SP1, ...
      (microsoft.public.windows.server.sbs)
    • Re: SBS 2003 Fax Sharepoint Routing
      ... Business Server 2003 and click "Change/Remove", ... If the Fax Services component was original installed by using the SBS ... Install fro the Fax Server component. ... And then we should push the shared fax client application from server to ...
      (microsoft.public.windows.server.sbs)